Abstract:This paper introduces a compact picosecond laser system using tapered double cladding fiber-single crystal fiber hybrid amplification technology for the first time. By modifying the Ginzburg-Landau equation, we established a simulation model and designed a passive mode-locked picosecond oscillator based on a semiconductor saturable absorber mirror. The oscillator outputs laser with a pulse width of 7.75 ps, a center wavelength of 1030.55 nm, and a spectrum width of 0.58 nm. The seed laser is stretched and amplified by the all-fiber front stage, and then injected into the tapered double cladding fiber-single crystal fiber hybrid amplifier. The laser power is amplified from 820 mw to 103.1 W, obtaining a gain of 21 dB. We used zero-phonon line pumping technology in single crystal fiber amplifier to reduce the thermal effects caused by quantum loss, thereby increasing the length of the crystal and increasing the power loading capacity. We designed a single crystal fiber amplification module using Yb:YAG with 60 mm long, 1 mm diameter and a 1 at.% doping rate for the first time. Finally a hundred-watt level picosecond laser output with a repetition frequency of 26.33 MHz, an average power of 103.1 W, a pulse width of 244.72 ps, a spectrum width of 1.16 nm, and a beam quality of M2 x = 1.368 and M2 y = 1.511 was obtained. To the best of our knowledge, this is the highest picosecond laser output power for an all-fiber front-stage combined with a single-stage single crystal fiber amplifier.

Compact femtosecond fiber laser with integrated optical components

Femtosecond Mode-locked Fiber Laser at 1 Μm Via Optical Microfiber Dispersion Management

A Compact 51.6-W, 26-Μj, Yb-doped All-Fiber Integrated CPA System Through Quasi-Rectangular Pulse Pre-Shaping

A compact 51.6-W, 26- μ J, Yb-doped all-fiber integrated CPA system through quasi-rectangular pulse pre-shaping

A Compact 500 MHz Femtosecond All-Fiber Ring Laser

Compact frequency-modulation pulsed single-frequency fiber laser

Compact hybrid laser based on semiconductor nanowires and a silica biconical fiber

Compact Fiber-Solid Picosecond Laser Source with Kilohertz Repetition Rate

Compact, repetition rate locked all-PM fiber femtosecond laser system based on low noise figure-9 Er:fiber laser

Ultra-Compact Q-Switched Single-Frequency Pulsed Fiber Lasers

Compact Frequency-Modulation Q-switched Single-Frequency Fiber Laser at 1083 Nm

Compact all-fiber high-energy fiber laser with sub-300-fs duration

All-Polarization-Maintaining, Ultra-Compact Tm-Doped Fiber Laser Designed for Mid-Infrared Comb

Construction of a Femtosecond Fiber Laser for Teaching and supercontinuum generation

Compact high-power FCPA enabled by chirped volume bragg grating and chirally-coupled-core fiber technologies

Ultracompact Fiber Laser Based on a Highly Integrated Optical Device

Compact hundred-watt level picosecond laser system based on tapered double cladding fiber-single crystal fiber hybrid amplifier

Compact all-fiber ring femtosecond laser with high fundamental repetition rate.

Hundred Watt Level and High Energy Compact Hybrid Fiber Femtosecond Laser with Good Beam Quality

A Sub-Nanosecond Narrow-Linewidth Pulsed Laser Source with Controllable Repetition Rate

An Experimental Study Of Ultrashort Pulsed Ytterbium-Doped Fibre Laser And Amplifier