Abstract:Polyimide film (Kapton) is an important polymer material used for the construction of spacecrafts. The performance of Kapton can be degraded for atomic oxygen erosion in space. Commonly used atomic oxygen protective layers have issues such as poor toughness and poor adhesion with the film. In this paper, Kapton/Al2O3 nanocomposite films were prepared via an ion exchange method, and the optical properties, mechanical properties, and mechanisms for the change in the mass and microstructure, before and after atomic oxygen exposure, were analyzed. The results show that the deposition of the Kapton/Al2O3 surface nanocomposite film prepared via the ion exchange method has no obvious effects on the internal structure and optical transmittance of the Kapton film matrix. The tensile strength and elongation of the prepared film were much higher than those of the pure Kapton film, demonstrating its good flexibility. Scanning electron microscope (SEM) analysis showed that the etching pits had a carpet-like morphology on the composite film surface and were relatively small after atomic oxygen erosion. In contrast with the C–C bond rupture in the oxydianiline (ODA) benzene in Kapton films, the Kapton/Al2O3 nanocomposite film mainly destroyed the C=C bond in the pyromellitic dianhydride (PMDA) benzene ring. On exposure to an atomic oxygen environment for a short period, the Kapton/Al2O3 nanocomposite film exhibited improved atomic oxygen erosion resistance because the Al2O3 layer inhibited atomic oxygen diffusion. With increasing atomic oxygen exposure time, the atomic oxygen diffused into the Kapton matrix via the pores of the Al2O3 layer, causing damage to the substrate. This resulted in a detachment of the surface Al2O3 layer and exposure of the Kapton matrix, and thereby the atomic oxygen resistance was decreased. The applicability of the ion exchange mechanism of trivalent Al element on the surface modification of the polyimide is explored in this study. The behavior of the Kapton/Al2O3 composite film under the atomic oxygen environment of space is investigated, which provides the basis for studying the effects of atomic oxygen on the flexible protective Kapton film.

Atomic Oxygen Exposure Behaviors of CVD-grown Carbon Nanotube Film and Its Polymer Composite Film

Erosion effects of atomic oxygen on carbon nanotube arrays in different incidence direction

Length-dependent Electrical and Thermal Properties of Carbon Nanotube-Loaded Epoxy Nanocomposites

Quantitative Evaluation of Released Nanomaterials from Carbon Nanotube Epoxy Nanocomposites During Environmental Exposure and Mechanical Treatment

Erosion Behavior of C/SiC Composites in Atomic Oxygen

Tribological Performance of MoS2-WS2 Composite Film under the Atomic Oxygen Irradiation Conditions

Preparation of carbon Nanotube/SiO 2 composite films and their tensile properties in harsh wet environments

Effect of Nitrogen Protective Atmosphere on Microstructure and High Temperature Erosion Property of TiAl3 and Cr3C2 Composite Coatings

Effects Of Atomic Oxygen Exposure On Tribological Property Of Zirconium Alloy

MoS 2 /WS 2 Nanosheet-Based Composite Films Irradiated by Atomic Oxygen: Implications for Lubrication in Space

The mechanical properties of oxygen plasma-treated carbon nanotube and silicon dioxide-reinforced polytetrafluoroethylene composite film

MoS2/WS2 Nanosheet-Based Composite Films Irradiated by Atomic Oxygen: Implications for Lubrication in Space

Atomic Oxygen Adaptability of Flexible Kapton/Al2O3 Composite Thin Films Prepared by Ion Exchange Method

Damage and degradation of mechanical properties of polyimide-based materials under atomic oxygen attack: A molecular dynamics simulation study

Carbon nanotube (CNT) metal composites exhibit greatly reduced radiation damage

Research on Atomic Oxygen Erosion Influence of Structural Damage and Tribological Properties of Mo/MoS2-Pb-PbS Thin Film

The effects of atomic oxygen and ion irradiation degradation on multi-polymers: A combined ground-based exposure and ReaxFF-MD simulation

Insight into the carbon nanotube agglomeration deteriorated fire safety of epoxy

Study on transverse high-velocity impact resistance of carbon nanotube films and their based composites

Large improvement of the tensile strength of carbon nanotube films in harsh wet environments by carbon infiltration

Reaction Of Diamond Thin Films With Atomic Oxygen Simulated As Low-Earth-Orbit Environment