Abstract:Human society’s need to build low-weight, high-strength and durable structures has increased the demand for composite materials. In this case, composites are used where high mechanical strength, low weight, sound and thermal insulation properties are required. One of the most important issues now is designing materials and coatings aimed at reducing heat loss and resisting high temperatures. One way to address this problem is to develop a technique for preparing and applying composite materials that slow down their heating applied to a surface. In this study, carbon nanotubes (CNTs) reinforced composites were fabricated using silicone molding to be applied to honeycomb sandwich structures. To determine the effect of CNTs on the thermal behavior of the sandwich panels, different weight percentages of this material (0.025, 0.05. 0.075 wt.%) were added to the epoxy resin. The results showed that the thermal stability of the epoxy composites was directly related to the increase in the percentage of CNTs as the CNT content increased to 0.075 wt.%, and the thermal degradation temperature of the epoxy composites increased by 14 °C. In addition, the energy absorption increased by 4.6% with an increase in CNTs up to 0.075 wt.%. Density measurements showed that the density of the nanocomposite samples increased by adding CNTs to pure epoxy resin. The actual densities of the samples reinforced with 0.025, 0.05, and 0.075 wt.% CNTs are 0.925, 0.926, and 0.927 of the theoretical density, respectively. Since the CNT dispersion uniformity in the epoxy matrix can significantly affect the properties of the composites, in this study, a new method of dispersing CNTs in the epoxy resin matrix resulted in higher thermal conductivity while using lower amounts of CNTs compared to other studies. The storage modulus of the epoxy matrix composites reinforced with 0.05 wt.% in this study was 25.9% and 6.9% higher than that from the previous study reinforced with 0.1 wt.% and 0.25 wt.% CNTs, respectively. Furthermore, the tanδ and loss modulus of the composite reinforced with 0.05 wt.% CNTs in this study were 52% and 54.5% higher than that from the previous study with 0.1 wt.% CNTs, respectively. This study provided an optimal approach for designers and engineers who want to effectively design their composite honeycomb sandwich structure with better thermal properties.

Study on transverse high-velocity impact resistance of carbon nanotube films and their based composites

Influence of Carbon Nanotube Coatings on Carbon Fiber by Ultrasonically Assisted Electrophoretic Deposition on Its Composite Interfacial Property.

Study on Mechanical Properties of Carbon Nanotube Reinforced Composites

Investigation of the influence of Halloysite Nanotubes (HNTs) on the low-velocity impact behavior of carbon fiber-reinforced epoxy composites

Free-Standing CNT Film for Interlaminar Toughening: Insight into Infiltration and Thickness Effects

Study on Mechanical Properties of Carbon Nanotube Reinforced Carbon Fiber/ Epoxy Resin Composites

Effects of the Electrophoretic Deposition of CNTs on the Mechanical Properties of Ti/CFRP Composite Laminates

Effect of CNT film interleaves on the flexural properties and strength after impact of CFRP composites

A multi-layer resin film infusion process to control CNTs distribution and alignment for improving CFRP interlaminar fracture toughness

High Speed Impact Properties Of Carbon Fiber/Epoxy Resin Composites

The effect of carbon nanotubes loading and processing parameters on the electrical, mechanical, and viscoelastic properties of epoxy-based composites

Effects of Carbon Nanotubes on Thermal Behavior of Epoxy Resin Composites

Study on the effect of carbon nanotubes on plastic composite reinforced with natural fiber

Improving Compression-after-impact Performance of Carbon–fiber Composites by CNTs/thermoplastic Hybrid Film Interlayer

Extraordinary impact resistance of carbon nanotube film with crosslinks under micro-ballistic impact

Impact-resistant carbon nanotube woven films: a molecular dynamics study

Impact Properties of Multi-Wall Carbon Nanotubes Modified Composites

Impact Performance Improvement of Multiscale Hybrid Fiber Reinforced Polymer Composites with CNT

Interlaminar properties of carbon nanotubes modified carbon fibre fabric reinforced polyimide composites

Tensile Mechanical Behaviors of High Loading of Carbon Nanotube/Epoxy Composites via Experimental and Finite Element Analysis

Carbon fiber/epoxy composite property enhancement through incorporation of carbon nanotubes at the fiber-matrix interphase – Part II: Mechanical and electrical properties of carbon nanotube coated carbon fiber composites