Abstract:Duplex stainless steels (DSS) are extensively applied in many fields such as petroleum industry, petrochemistry, desalination service and paper-making industry. They are characterized by a two-phase structure., offering an attractive combination of corrosion resistance and mechanical properties. Their best general properties are obtained by keeping approximately equal volume fractions of austenite and ferrite but averting third harmful phases, such as sigma, gamma(2), chi, carbide and nitride, to be precipitated. These harmful phases can be formed from ferrite when DSS are welded or worked at improper high temperatures. Recently, a kind of economical DSS 2101 of typical composition Fe-21.4Cr-1.2Ni-5.7Mn-0.23N-0.31Mo was developed and shows a wide application potential due to its higher yield strength, better pitting corrosion resistance and lower cost than traditional 304 austenite steel. However, limited research has been dedicated to studying the microstructure and mechanical properties of DSS 2101. Especially research on the nature of precipitations and their effects on mechanical properties in DSS 2101 was still lacking in comparison to many researches on the precipitations in DSS 2205 and DSS 2507. In the present work, it aims at investigating how the precipitations can affect the corrosion resistance of DSS 2101. Pitting corrosion resistance of samples aged at 700 degrees C in 1 mol/L NaCl solution was evaluated by potentiodynamic polarization curve test. The electrochemical potentiokinetic reactivation (EPR) test was also used to evaluate the degree of sensitization to intergranular corrosion. Scanning electron microscopy (SEM) and optical microscopy (OM) were used to observe the surface morphology after electrochemical tests. The results demonstrate that both the resistance to pitting (E-b) and intergranular corrosion (R-a) decreases with aging time increasing. Pitting nucleates preferentially in the ferrite phase for the solution-annealed sample, while the initiation of pitting corrosion takes place around Cr2N, in the newly formed secondary austenite for the aged specimen. EPR tests conducted at room temperature are able to detect the sensitization to R-a due to Cr2N precipitation. With increasing aging time, more Cr2N particles are precipitated at phase interfaces and grain boundaries, causing a continuous decrease of resistance to intergranular corrosion.

Effects of Long-Term Thermal Aging on the Stress Corrosion Cracking Behavior of Cast Austenitic Stainless Steels in Simulated Pwr Primary Water

DSI-based Studies of the Effects of High-temperature Aging on Local Mechanical Properties of HR3C/T92 Dissimilar Steel Welded Joint

Unveiling the synergistic effect of thermal aging and irradiation corrosion on the passivation performance and stress corrosion cracking of 308 L stainless steel under high-temperature water environment

Effect of thermal aging on the environmental assisted cracking behavior of 308L weld metal in high temperature water

Microstructural Evolution and Mechanical Behavior of Thermally Aged Cast Duplex Stainless Steel

Effects of pressurized water reactor environment and cyclic loading parameters on the low cycle fatigue behavior of 304L stainless steel

The Microstructure and Mechanical and Corrosion Behaviors of Thermally Aged Z3CN20-09M Cast Stainless Steel for Primary Coolant Pipes of Nuclear Power Plants

Investigation of thermal aging damage mechanism of the Cast Duplex Stainless Steel

Thermal Aging Effect Of Cdss On The Integrity Of The Pwr Primary Pipe With Damage Tolerance Method

Thermal aging effect on Z3CN20.09M Cast Duplex Stainless Steel

Correlating oxidation resistance to stress corrosion cracking of 309L and 308L stainless steel claddings in simulated PWR primary water

Effect of Thermal Aging on Microstructural Evolution in Ferrite of Duplex Stainless Steel in Nuclear Power Plant Applications

Effect of Aging Time on Electrochemical Corrosion Behavior of 2101 Duplex Stainless Steel

Environment assisted cracking of 308L weld metal in high temperature water

Investigating Microstructural and Microchemical Effect of Aging on Cu-rich Phase of 304HCu SS Exposed to Chloride Environment by Slow Strain Rate Testing Technique

Effect of Short Term Aging on Microstructure Evolution, Pitting and Intergranular Corrosion Behaviour of Uns31254

Effects of composition and microstructure on oxidation and stress corrosion cracking susceptibility of stainless steel claddings in hydrogenated PWR primary water

Aging degradation of cast stainless steel: Status and program

Effect of Aging Temperature on Phase Decomposition and Mechanical Properties in Cast Duplex Stainless Steels

Study on Corrosion Fatigue Behavior of 304L Austenite Stainless Steel in 325 °C High-Temperature Water Environment

Effect of Short-Time Aging on the Pitting Corrosion Behavior of a Novel Lean Duplex Stainless Steel 2002