Abstract:Using high-strength (HS) materials in steel–concrete composite beams is an efficient approach to reduce the self-weight and to improve the sustainability benefits of such members. Due to a lack of precise knowledge of the ductility of composite beams beyond their first yield as a result of the non-linear response of their constituent materials, a comprehensive investigation is reported herein to quantify the available rotation capacity of composite beams using HS materials when subjected to sagging bending. An advanced three-dimensional finite element model is utilised to calculate the end rotation of single-point-loaded simply-supported composite beams. The model has demonstrated to be adequate and reliable in terms of predicting the flexural strength and load–deflection response by comparisons with numerous experimental results reported elsewhere. As many as 1380 beams with various strengths of steel and concrete as well as a wide range of the degree of shear connection and geometries are modelled, and both solid slabs and composite slabs using profiled steel decking are incorporated. Analyses of this body of data indicate that the depth of the neutral axis is the most essential parameter for determining the available sagging rotation capacity, of which an increased value leads to a lower rotation capacity. The yield strength of the steel also has noticeable effects with higher values resulting in poorer rotation performance. The available rotation capacity is also sensitive to the span-to-depth ratio of the beams. In addition, the effects of varying cross-sectional geometries, different patterns of shear connector distributions as well as of geometric imperfections and residual stresses are clarified, which are shown to be slight and can therefore be ignored. Finally, a non-linear empirical equation is developed to predict the available rotation capacity of composite beams using HS materials, which covers the range of numerical data with satisfactory consistency. The outcomes provide an important basis for evaluating the ductility of composite beams by comparing with the required rotation capacity.

Elastoplastic Cross-Sectional Behavior of Composite Beams with High-Strength Steel: Analytical Modeling

Investigation of elasto-plastic seismic response analysis method for complex steel bridges

Experimental Studies on Shear Strength of Steel–Concrete Composite Beams

PLASTIC ANALYSIS OF SHEAR BEHAVIOR OF COMPOSITE STEEL-CONCRETE BEAMS

Flexural Strength Of High-Strength Steel-Concrete Composite Beams With Varying Steel Grades

Modeling and Investigation of Elasto-Plastic Behavior of Steel–concrete Composite Frame Systems

Available rotation capacity of composite beams with high-strength materials under sagging moment

Mechanical Behavior of Steel–HFRC Composite Girders

Model for Elasto-Plastic Analysis of Multistory and Highrise Steel-Concrete Composite Frame Systems

Experimental Studies on Behavior of Composite Steel High-Strength Concrete Beams

Finite Element Modelling of Steel–concrete Composite Beams with High-Strength Friction-Grip Bolt Shear Connectors

Analytical behavior of frames with steel beams to concrete-filled steel tubular column

Nonlinear Model for Seismic Analysis of Steel-Concrete Composite Beams

Research on Skeleton Curves of Steel-Concrete Composite Beams

Experiment and finite element analysis of bending behavior of high strength steel-UHPC composite beams

Experimental Study on Composite Steel- HSC Beams

Flexural behavior of prefabricated high-strength steel-concrete composite beams with steel block connectors

Experimental study on HSS-concrete composite beams

Numerical modeling on concrete structures and steel-concrete composite frame structures

Analytical And Numerical Modeling Of Prestressed Continuous Steel-Concrete Composite Beams

Flexural behaviour of composite beams with high strength steel