Abstract:An improved understanding of the performance of composite beams subjected to combined flexure and torsion is essential for practical design as such loading states are very common in bridges for the main girder and in buildings for edge beams. Multi-span steel–concrete composite beams consisting of two steel joists and one concrete slab are concerned herein, on which an experimental study and finite element (FE) modelling analyses are presented. Eight reduced scale beams under combined flexure and torsion to varying degrees are tested, with both full and partial shear connection being incorporated. Either flexure-dominated or torsion-dominated failure modes are observed in each test depending on the ratio between the bending and torsional moments applied externally. Load-deformation responses, ultimate strengths as well as flexure–torsion interaction of all specimens are also reported and discussed. Based on the experimental outcomes, a three-dimensional FE model is developed and further validated against the test results, and an extensive range of parametric analyses are undertaken by using the FE model. It is indicated that in addition to well-known parameters relating to the concrete slab and stirrups, the torsional strength of multi-span composite beams is also sensitive to the degree of shear connection, spacing of the joists and span-to-depth ratio. Contributions of the steel joist and its constraint on the slab towards the torsional strength are increased. With respect to their flexure–torsion interaction relation, no increase in the torsional strength is observed within the presence of combined flexure, and vice versa. The interaction is insensitive generally to various parameters considered herein and the test results exhibit consistent phenomenon. Design guidance and new equations for predicting the torsional strength and the flexure–torsion interaction relation are proposed based on the test and FE analysis results as well as a comprehensive review of existing approaches in the literature.

Flexural behaviour of composite beams with high strength steel

Flexural Strength Of High-Strength Steel-Concrete Composite Beams With Varying Steel Grades

Experimental Studies on Shear Strength of Steel–Concrete Composite Beams

Flexural Performance of Composite Beams Using High-Strength Steel and High-Strength Concrete

Finite Element Modelling of Steel–concrete Composite Beams with High-Strength Friction-Grip Bolt Shear Connectors

Strength of Multi-Span Composite Beams Subjected to Combined Flexure and Torsion

Flexural behaviour of deconstructable composite beams

Flexural Behaviours of CFRP Sheets Reinforced Steel-Concrete Composite Beams

Experimental Studies on Behavior of Composite Steel High-Strength Concrete Beams

Flexural behavior of prefabricated high-strength steel-concrete composite beams with steel block connectors

Non-linear analysis of multi-span composite beams under combined flexure and torsion

Investigation on flexural behavior of steel-UHPC composite beams with steel shear keys

Flexural mechanical properties of H-shaped steel-bamboo scrimber composite beams

Experiment and finite element analysis of bending behavior of high strength steel-UHPC composite beams

Flexural Strength Design of Hybrid FRP-Steel Reinforced Concrete Beams

Flexural behavior analysis of double honeycomb steel composite encased concrete beams: An integrated experimental and finite element study

Flexural Performance of SSK Reinforced Steel–UHPC Composite Beams: Experimental and Numerical Study

Finite Element Modeling of Steel-concrete Composite Beams with Different Shear Connection Degrees

ULTIMITE FLEXURAL CAPACITY OF COMPOSITE STEELCONCRETE BEAMS BEAMS WITH PARTIAL SHEAR CONNECTION

Flexural Strength of Hybrid Steel I-beams Based on Slenderness

The flexural behavior of cold-formed steel composite beams