Abstract:Abstract Nickel aluminum layered double hydroxide (NiAl LDH) with nitrate in its interlayer is investigated as a negative electrode material for lithium-ion batteries (LIBs). The effect of the potential range (i.e., 0.01–3.0 V and 0.4–3.0 V vs. Li + /Li) and of the binder on the performance of the material is investigated in 1 M LiPF 6 in EC/DMC vs. Li. The NiAl LDH electrode based on sodium alginate (SA) binder shows a high initial discharge specific capacity of 2586 mAh g −1 at 0.05 A g −1 and good stability in the potential range of 0.01–3.0 V vs. Li + /Li, which is better than what obtained with a polyvinylidene difluoride (PVDF)-based electrode. The NiAl LDH electrode with SA binder shows, after 400 cycles at 0.5 A g −1 , a cycling retention of 42.2% with a capacity of 697 mAh g −1 and at a high current density of 1.0 A g −1 shows a retention of 27.6% with a capacity of 388 mAh g −1 over 1400 cycles. In the same conditions, the PVDF-based electrode retains only 15.6% with a capacity of 182 mAh g −1 and 8.5% with a capacity of 121 mAh g −1 , respectively. Ex situ X-ray photoelectron spectroscopy (XPS) and ex situ X-ray absorption spectroscopy (XAS) reveal a conversion reaction mechanism during Li + insertion into the NiAl LDH material. X-ray diffraction (XRD) and XPS have been combined with the electrochemical study to understand the effect of different cutoff potentials on the Li-ion storage mechanism. Graphical abstract The as-prepared NiAl-NO 3 − -LDH with the rhombohedral R-3 m space group is investigated as a negative electrode material for lithium-ion batteries (LIBs). The effect of the potential range (i.e., 0.01–3.0 V and 0.4–3.0 V vs. Li + /Li) and of the binder on the material’s performance is investigated in 1 M LiPF 6 in EC/DMC vs. Li. Ex situ X-ray photoelectron spectroscopy (XPS) and ex situ X-ray absorption spectroscopy (XAS) reveal a conversion reaction mechanism during Li + insertion into the NiAl LDH material. X-ray diffraction (XRD) and XPS have been combined with the electrochemical study to understand the effect of different cutoff potentials on the Li-ion storage mechanism. This work highlights the possibility of the direct application of NiAl LDH materials as negative electrodes for LIBs.

Effect of Li Atom Infiltration by the Way of Electro-Osmosis on Electrochemical Properties of Amorphous Mg65Ni27La8 Alloy Used As Negative Electrode Materials for the Nickel–metal Hydride Secondary Batteries

Effect of the La/Mg ratio on the structure and electrochemical properties of LaxMg3-xNi9 (x = 1.6 -2.2) hydrogen storage electrode alloys for nickel-metal hydride batteries

Electrode Properties and the Dehydrogenation Process of Amorphous Mg–Ni–La Alloys

An electrochemical investigation of mechanical alloying of MgNi-based hydrogen storage alloys

The effect of Gd on the microstructure and electrochemical properties of Mg-Ni-based alloys

Influence of Annealing Treatment on Microstructure and Cycling Stability of La-Rich Ml(Nicomnal)(5) Alloy Electrode for Ni/Mh Batteries

The structural and electrochemical properties of La2Mg(Ni0.8-xCo0.2Alx)9 (x = 0-0.03) hydrogen storage electrode alloys

The electrochemical properties of LaxMg3-xNi9 (x = 1.0-2.0) hydrogen storage alloys

Electrochemical properties of amorphous Mg–Fe alloys mixed with Ni prepared by ball-milling

A study on the structure and electrochemical properties of La 2Mg(Ni0.95M0.05)9 (M = Co, Mn, Fe, Al, Cu, Sn) hydrogen storage electrode alloys

Microstructural Investigation of Electrochemical Hydrogen Storage in Amorphous Mg–Ni–La Alloy

PHASE STRUCTURE AND ELECTROCHEMICAL PROPERTIES OF La-Mg-Ni SYSTEM AB_3 TYPE HYDROGEN STORAGE ELECTRODE ALLOYS

Electrochemical performance and capacity degradation mechanism of single-phase La–Mg–Ni-based hydrogen storage alloys

Electrochemical features of Ce2Ni7-type La0.65Nd0.15Mg0.25Ni3.20M0.10 (M = Ni, Mn and Al) hydrogen storage alloys for rechargeable nickel metal hydride battery

Microstructures and electrochemical hydrogen storage properties of novel Mg–Al–Ni amorphous composites

La–Mg–Ni ternary hydrogen storage alloys with Ce2Ni7-type and Gd2Co7-type structure as negative electrodes for Ni/Mh batteries

Influence of over-stoichiometry on hydrogen storage and electrochemical properties of Sm-doped low-Co AB5-type alloys as negative electrode materials in nickel-metal hydride batteries

Study of Sn-Ni alloy as negative electrode for lithium-ion batteries

Electrochemical study on nickel aluminum layered double hydroxides as high-performance electrode material for lithium-ion batteries based on sodium alginate binder

Hydrogen Storage and Electrochemical Properties of Pr, Nd and Co-free La13.9Sm24.7Mg1.5Ni58Al1.7Zr0.14Ag0.07 Alloy As a Nickel-Metal Hydride Battery Electrode

Reducing the Electrochemical Capacity Decay of Milled Mg–Ni Alloys: the Role of Stabilizing Amorphous Phase by Ti-substitution