Volume Estimates for Kähler-Einstein Metrics: the Three Dimensional Case

X. -X. Chen,S. K. Donaldson

DOI: https://doi.org/10.4310/jdg/1361800864

2013-01-01

Journal of Differential Geometry

Abstract:We obtain an estimate for the volume of neighbourhoods of sets of large curvature in three-dimensional K\"ahler-Einstein manifolds.

What problem does this paper attempt to address?

Volume Estimates for Kähler-Einstein Metrics and Rigidity of Complex Structures

X. -X. Chen,S. K. Donaldson

DOI: https://doi.org/10.4310/jdg/1361800865

2013-01-01

Journal of Differential Geometry

Abstract:This paper extends our earlier results to higher dimensions using a differentapproach, based on the rigidity of complex structures on certain domains.
On existence of the prescribing k-curvature of the Einstein tensor

Leyang Bo,Weimin Sheng

2018-01-01

Abstract:In this paper, we study the problem of conformally deforming a metric on a 3-dimensional manifold M^3 such that its k-curvature equals to a prescribed function, where the k-curvature is defined by the k-th elementary symmetric function of the eigenvalues of the Einstein tensor, 1≤ k≤ 3. We prove the solvability of the problem and the compactness of the solution sets on manifolds when k=2 and 3, provided the conformal class admits a negative k-admissible metric with respect to the Einstein tensor.
Conical Kähler–Einstein Metrics Revisited

Chi Li,Song Sun

DOI: https://doi.org/10.1007/s00220-014-2123-9

2014-01-01

Abstract:In this paper we introduce the “interpolation–degeneration” strategy to study Kähler–Einstein metrics on a smooth Fano manifold with cone singularities along a smooth divisor that is proportional to the anti-canonical divisor. By “interpolation” we show the angles in (0, 2π] that admit a conical Kähler–Einstein metric form a connected interval, and by “degeneration” we determine the boundary of the interval in some important cases. As a first application, we show that there exists a Kähler–Einstein metric on ${\mathbb{P}^2}$ with cone singularity along a smooth conic (degree 2) curve if and only if the angle is in (π/2, 2π]. When the angle is 2π/3 this proves the existence of a Sasaki–Einstein metric on the link of a three dimensional A 2 singularity, and thus answers a question posed by Gauntlett–Martelli–Sparks–Yau. As a second application we prove a version of Donaldson’s conjecture about conical Kähler–Einstein metrics in the toric case using Song–Wang’s recent existence result of toric invariant conical Kähler–Einstein metrics.
Estimates of Kähler metrics on noncompact finite volume hyperbolic Riemann surfaces, and their symmetric products

Aryasomayajula, Anilatmaja,Mukherjee, Arijit

DOI: https://doi.org/10.1007/s10455-024-09967-8

2024-09-26

Annals of Global Analysis and Geometry

Abstract:Let X denote a noncompact finite volume hyperbolic Riemann surface of genus , with only one puncture at (identifying X with its universal cover ). Let denote the Satake compactification of X . Let denote the cotangent bundle on . For , we derive an estimate for , the Bergman metric associated to the line bundle . For a given , the pull-back of the Fubini-Study metric on the Grassmannian, which we denote by , defines a Kähler metric on , the d -fold symmetric product of . Using our estimates of , as an application, we derive an estimate for , the volume form associated to the (1,1)-form .

mathematics
Volume Minimization and Conformally Kähler, Einstein–Maxwell Geometry

Akito Futaki,Hajime Ono

DOI: https://doi.org/10.2969/jmsj/77837783

2018-01-01

Journal of the Mathematical Society of Japan

Abstract:Let $M$ be a compact complex manifold admitting a K\"ahler structure. A conformally K\"ahler, Einstein-Maxwell metric (cKEM metric for short) is a Hermitian metric $\tilde{g}$ on $M$ with constant scalar curvature such that there is a positive smooth function $f$ with $g = f^2 \tilde{g}$ being a K\"ahler metric and $f$ being a Killing Hamiltonian potential with respect to $g$. Fixing a K\"ahler class, we characterize such Killing vector fields whose Hamiltonian function $f$ with respect to some K\"ahler metric $g$ in the fixed K\"ahler class gives a cKEM metric $\tilde{g} = f^{-2}g$. The characterization is described in terms of critical points of certain volume functional. The conceptual idea is similar to the cases of K\"ahler-Ricci solitons and Sasaki-Einstein metrics in that the derivative of the volume functional gives rise to a natural obstruction to the existence of cKEM metrics. However, unlike the K\"ahler-Ricci soliton case and Sasaki-Einstein case, the functional is neither convex nor proper in general, and often has more than one critical points. The last observation matches well with the ambitoric examples studied earlier by LeBrun and Apostolov-Maschler.
Space of Kähler Metrics (V)– Kähler Quantization

Xiuxiong Chen,Song Sun

DOI: https://doi.org/10.1007/978-3-0348-0257-4_2

2012-01-01

Abstract:We prove the convergence of geodesic distance during the quantization of thespace of Kähler potentials. As applications, this provides alternative proofsof certain inequalities about the K-energy functional in the projective case.
AHLER-EINSTEIN METRIC REVISITED

Chi Li,Song Sun

2012-01-01

Abstract:In this paper we introduce the interpolation-degneration strategy to study Kahler-Einstein metrics on a smooth Fano manifold with cone singularities along a smooth divisor that is proportional to the anti-canonical divisor. By interpolation we show the angles in (0,2�) that admit a conical Kahler-Einstein metric form an interval; and by degeneration we figure out the boundary of the interval. As a first application, we show that there exists a Kahler-Einstein metric on P 2 with cone singularity along a smooth conic (degree 2) curve if and only if the angle is in (�/2,2�). When the an- gle is 2�/3 this proves the existence of a Sasaki-Einstein metric on the link of a three dimensional A2 singularity, and thus answers a problem posed by Gauntlett-Martelli- Sparks-Yau. As a second application we prove a version of Donaldson's conjecture about conical Kahler-Einstein metrics in the toric case using Song-Wang's recent existence result of toric invariant conical Kahler-Einstein metrics.
D ec 2 01 7 ON THE CONSTANT SCALAR CURVATURE KÄHLER METRICS ( I ) — APRIORI ESTIMATES

XIUXIONG CHEN,JINGRUI CHENG

2018-01-01

Abstract:In this paper, we derive apriori estimates for constant scalar curvature Kähler metrics on a compact Kähler manifold. We show that higher order derivatives can be estimated in terms of a C bound for the Kähler potential. We also discuss some local versions of these estimates which can be of independent interest.
Conjugate radius, volume comparison and rigidity

Zhiyao Xiong,Xiaokui Yang

2024-08-05

Abstract:In this paper, we prove conjugate radius estimate, volume comparison and rigidity theorems for Kähler manifolds with various curvature conditions.

Differential Geometry
Volume and Angle Structures on 3-Manifolds

Feng Luo

DOI: https://doi.org/10.4310/ajm.2007.v11.n4.a2

2007-01-01

Asian Journal of Mathematics

Abstract:We propose an approach to find constant curvature metrics on triangulated closed 3-manifolds using a finite dimensional variational method whose energy function is the volume. The concept of an angle structure on a tetrahedron and on a triangulated closed 3-manifold is introduced following the work of Casson, Murakami and Rivin. It is proved by A. Kitaev and the author that any closed 3-manifold has a triangulation supporting an angle structure. The moduli space of all angle structures on a triangulated 3-manifold is a bounded open convex polytope in a Euclidean space. The volume of an angle structure is defined. Both the angle structure and the volume are natural generalizations of tetrahedra in the constant sectional curvature spaces and their volume. It is shown that the volume functional can be extended continuously to the compact closure of the moduli space. In particular, the maximum point of the volume functional always exists in the compactification. The main result shows that for a 1-vertex triangulation of a closed 3-manifold if the volume function on the moduli space has a local maximum point, then either the manifold admits a constant curvature Riemannian metric or the manifold contains a non-separating 2-sphere or real projective plane.
Curvature and injectivity radius estimates for Einstein 4-manifolds

Je Cheeger,Gang Tian

DOI: https://doi.org/10.1090/S0894-0347-05-00511-4

2006-01-01

Journal of the American Mathematical Society

Abstract:Let $M^4$ denote an Einstein $4$-manifold with Einstein constant, $\lambda$, normalized to satisfy $\lambda \in \{-3,0,3\}$. For $B_r(p)\subset M^4$, a metric ball, we prove a uniform estimate for the pointwise norm of the curvature tensor on $B_{\frac {1}{2}r}$, under the assumption that the $L_2$-norm of the curvature on $B_r(p)$ is less than a small positive constant, which is independent of $M^4$, and which in particular, does not depend on a lower bound on the volume of $B_r(p)$. In case $\lambda =-3$, we prove a lower injectivity radius bound analogous to that which occurs in the theorem of Margulis, for compact manifolds with negative sectional curvature, $-1\leq K_M<0$. These estimates provide key tools in the study of singularity formation for $4$-dimensional Einstein metrics. As one application among others, we give a natural compactification of the moduli space of Einstein metrics with negative Einstein constant on a given $M^4$.
On the Constant Scalar Curvature Kähler Metrics, Apriori Estimates

Xiuxiong Chen,Jingrui Cheng

DOI: https://doi.org/10.1090/jams/967

2021-01-01

Journal of the American Mathematical Society

Abstract:In this paper, we derive apriori estimates for constant scalar curvature Kähler metrics on a compact Kähler manifold. We show that higher order derivatives can be estimated in terms of a C^0 bound for the Kähler potential. We also discuss some local versions of these estimates which can be of independent interest.
The Space of Kaehler Metrics

XX Chen

DOI: https://doi.org/10.4310/jdg/1090347643

2000-01-01

Journal of Differential Geometry

Abstract:Donaldson conjectured \cite{Dona96} that the space of K\"ahler metrics is geodesic convex by smooth geodesic and that it is a metric space. Following Donaldson's program, we verify the second part of Donaldson's conjecture completely and verify his first part partially. We also prove that the constant scalar curvature metric is unique in {\bf each} Kähler class if the first Chern class is either strictly negative or 0. Furthermore, if $C_1 \leq 0,$ the constant scalar curvature metric realizes the global minimum of Mabuchi energy functional; thus it provides a new obstruction for the existence of constant curvature metric: if the infimum of Mabuchi energy (taken over all metrics in a fixed Kähler class) isn't bounded from below, then there doesn't exist a constant curvature metric. This extends the work of Mabuchi and Bando\cite{Bando87}: they showed that Mabuchi energy bounded from below is a necessary condition for the existence of Kähler-Einstein metrics in the first Chern class.
Complete Kähler manifolds with nonnegative Ricci curvature

Gang Liu

2024-04-12

Abstract:We consider complete Kähler manifolds with nonnegative Ricci curvature. The main results are: 1. When the manifold has nonnegative bisectional curvature, we show that $\lim\limits_{r\to\infty}\frac{r^{2}}{vol(B(p, r))}\int_{B(p, r)}S$ exists. In other words, it depends only on the manifold. This solves a question of Ni. Also, we establish estimates among volume growth ratio, integral of scalar curvature, and the degree of polynomial growth holomorphic functions. The new point is that the estimates are sharp for any prescribed volume growth rate. 2. We discover a strong rigidity for complete Ricci flat Kähler metrics. Let $M^n (n\geq 2)$ be a complete Kähler manifold with nonnegative Ricci curvature and Euclidean volume growth. Assume either the curvature has quadratic decay, or the Kähler metric is $dd^c$-exact with quadratic decay of scalar curvature. If one tangent cone at infinity is Ricci flat, then $M$ is Ricci flat. In particular, the tangent cone is unique. In other words, we can test Ricci flatness of the manifold by checking one single tangent cone. This seems unexpected, since apriori, there is no equation on $M$ and the Bishop-Gromov volume comparison is not sharp on Ricci flat (nonflat) manifolds. Such result is in sharp contrast to the Riemannian setting: Colding and Naber showed that tangent cones are quite flexible when $Ric\geq 0$ and $|Rm|r^2<C$. This reveals subtle differences between Riemannian case and Kähler case. The result contains lots of examples, such as all noncompact Ricci flat Kähler surfaces of Euclidean volume growth (hyper-Kähler ALE 4-manifolds classified by Kronheimer), higher dimensional examples of Tian-Yau type, as well as an example with irregular cross section. It also covers Ricci flat Kähler metrics of Euclidean volume growth on Stein manifolds with $b_2 = 0$(e.g., $\mathbb{C}^n$).

Differential Geometry,Complex Variables
Kähler--Einstein metrics on quasi-projective manifolds

Quang-Tuan Dang,Duc-Viet Vu

2023-09-08

Abstract:Let $X$ be a compact Kähler manifold and $D$ be a simple normal crossing divisor on $X$ such that $K_X+D$ is big and nef. We first prove that the singular Kähler--Einstein metric constructed by Berman--Guenancia is almost-complete on $X \backslash D$ in the sense of Tian--Yau. In our second main result, we establish the weak convergence of conic Kähler--Einstein metrics of negative curvature to the above-mentioned metric when $K_X+D$ is merely big, answering partly a recent question posed by Biquard--Guenancia. Potentials of low energy play an important role in our approach.

Differential Geometry,Complex Variables
A survey on Kähler–Einstein metrics

SHING TUNG YAU

DOI: https://doi.org/10.1090/pspum/041/740889

1984-01-01

Abstract:Let M be a complex manifold. Then a Hermitian metric X, g, dz'& di/defined on M is said to be Kähler if the Kähler form Q= VT 2.78. jdz'/\dz) is closed. The Ricci form of this metric is defined to be-60 log det (gº). If the Ricci form of the Kähler metric is proportional to the Kähler form, the metric is called Kähler-Einstein. These metrics can be considered as the analogue of the gravitational potential which satisfies the Einstein equations with no matter (but possibly with cosmological constant). If the manifold is not compact, we require the metric to be complete.The first definite contribution to the subject was due to Calabi. He tried to construct canonical Kähler metrics on a compact Kähler manifold by variational methods. In fact, if M is a compact Kähler manifold, then for each cohomology class@ e H''(M) which can be represented by a Kähler form, he considered the space H of Kähler metrics whose Kähler form represent w. For each Kähler
Quantitative comparison theorems in Riemannian and Kähler geometry

Kwok-Kun Kwong

DOI: https://doi.org/10.48550/arXiv.1904.08595

2019-04-18

Abstract:We obtain sharp quantitative Laplacian upper and lower estimates under no assumption on curvatures. As a result, we derive quantitative Laplacian, area and volume comparison theorems for tubes in Riemannian and Kähler manifolds under weak integral curvature assumptions. We also give some applications, such as a general Bonnet-Myers theorem and Cheng's eigenvalue estimate under weak integral curvature assumptions.

Differential Geometry
Space of Kähler metrics III – On the lower bound of the Calabi energy and geodesic distance

Xiuxiong Chen

DOI: https://doi.org/10.1007/s00222-008-0153-7

IF: 3.128

2008-01-01

Inventiones mathematicae

Abstract:In this paper, we first prove a folklore conjecture on a greatest lower bound of the Calabi energy in all K\"ahler manifold. Similar result in algebriac setting was obtained by S. K. Donaldson. Secondly, we give an upper/lower bound estimate of the K energy in terms of the geodesic distance and the Calabi energy. This is used to prove a theorem on convergence of K\"ahler metrics in holomorphic coordinates, with uniform bound on the Ricci curvature and the diameter. Thirdly, we set up a framework for the existence of geodesic rays when an asymptotic direction is given. I
Bach-flat Asymptotically Locally Euclidean Metrics

Gang Tian,Jeff Viaclovsky

DOI: https://doi.org/10.1007/s00222-004-0412-1

IF: 3.128

2004-01-01

Inventiones mathematicae

Abstract:We obtain a volume growth and curvature decay result for various classes of complete, noncompact Riemannian metrics in dimension 4; in particular our method applies to anti-self-dual or Kähler metrics with zero scalar curvature, and metrics with harmonic curvature. Similar results were obtained for Einstein metrics in [And89], [BKN89], [Tia90], but our analysis differs from the Einstein case in that (1) we consider more generally a fourth order system in the metric, and (2) we do not assume any pointwise Ricci curvature bound.

Volume Estimates for Kähler-Einstein Metrics: the Three Dimensional Case

Volume Estimates for Kähler-Einstein Metrics and Rigidity of Complex Structures

On existence of the prescribing k-curvature of the Einstein tensor

Conical Kähler–Einstein Metrics Revisited

Estimates of Kähler metrics on noncompact finite volume hyperbolic Riemann surfaces, and their symmetric products

Volume Minimization and Conformally Kähler, Einstein–Maxwell Geometry

Space of Kähler Metrics (V)– Kähler Quantization

AHLER-EINSTEIN METRIC REVISITED

D ec 2 01 7 ON THE CONSTANT SCALAR CURVATURE KÄHLER METRICS ( I ) — APRIORI ESTIMATES

Conjugate radius, volume comparison and rigidity

Volume and Angle Structures on 3-Manifolds

Curvature and injectivity radius estimates for Einstein 4-manifolds

On the Constant Scalar Curvature Kähler Metrics, Apriori Estimates

The Space of Kaehler Metrics

Complete Kähler manifolds with nonnegative Ricci curvature

Kähler--Einstein metrics on quasi-projective manifolds

A survey on Kähler–Einstein metrics

Quantitative comparison theorems in Riemannian and Kähler geometry

Space of Kähler metrics III – On the lower bound of the Calabi energy and geodesic distance

Bach-flat Asymptotically Locally Euclidean Metrics