Effect of holding time on microstructure and mechanical properties of ZrO 2 /TiAl joints brazed by Ag–Cu filler metal

xiangyu dai,jian cao,jiakun liu,shuai su,jicai feng
DOI: https://doi.org/10.1016/j.matdes.2015.08.020
IF: 9.417
2015-01-01
Materials & Design
Abstract:Reliable joining of ZrO2 ceramic to TiAl alloy is crucial for the success of the engine industrial application. However, there have been few systematic investigations on joining of ZrO2 ceramic and TiAl alloy. In this study, reliable brazing of ZrO2 ceramic and TiAl alloy was achieved using inactive AgCu filler metal. The interfacial microstructure of the joints was characterized by SEM, XRD and TEM. Effects of holding time on the microstructure and mechanical properties of the joints were investigated in details. The results revealed that Cu3Ti3O+TiO layers were formed adjacent to ZrO2 ceramic while AlCu2Ti layer was formed at TiAl substrate. The thickness of Cu3Ti3O+TiO layers increased and the granular AlCu2Ti coarsened gradually with the prolongation of holding time. The hardness and Young's modulus of reaction phases were characterized by nano-indentation to reveal the plastic deformability. The highest shear strength of 48.4MPa was achieved when brazed at 880°C for 10min.
What problem does this paper attempt to address?