Abstract:Journal of Composite Materials, Ahead of Print. This study investigates the impact response of thermoplastic composite materials. The material system under consideration is a carbon fiber reinforced low melt semi-crystalline resin TC1225 LMPAEK reinforced with T700 G (T700/LMPAEK). Several High Energy Dynamic Impact (HEDI) tests were performed wherein an aluminum projectile impacted T700/LMPAEK panels at different velocities. In the impact experiment studied herein, the projectile impacted the T700/LMPAEK panel at 73.8 m/s and rebounded. The ensuing damage to the T700/LMPAEK panel was characterized via ultrasonic C-scans, which enabled visualizing delamination extent and through-thickness matrix cracks as the boundaries between delaminations at individual interfaces. Since the projectile rebounded after impact in the current test, the fiber damage mode, while present, was not as significant as in the case of tests wherein the projectile perforated the panel. The impact event was modeled using a combined continuum damage mechanics and cohesive zone analysis approach with the commercially available hydrocode LS-DYNA®. The dynamic deformation and damage of the continuum, that is, the plies in the T700/LMPAEK laminate, were modeled using a Deformation Gradient Decomposition (DGD) material model, that is, MAT299 available within LS-DYNA. The interlaminar regions were treated as zero-thickness cohesive zones, wherein the dynamic delamination mechanics were modeled using a traction-separation formulation. Mixed-mode delamination growth was captured using the Benzegaggh-Kenane (B-K) traction-separation interpolation law. Strain-rate sensitivity of interlaminar fracture toughness was included using approximations based on published literature. The outcomes of the modeling effort demonstrate good correlations with test data regarding panel deflection, panel-projectile interactions, damage modes and damage extent.

Impact Behavior and Damage Characteristics of Hybrid Composites Reinforced by Ti Fibers and M40 Fibers

Damage Behaviour of Al Matrix Composite Reinforced with Ti–6Al–4V Meshes under the Hypervelocity Impact

Damage mechanism of (2D-Tif)/Al composites against hypervelocity impact

Hypervelocity impact damage to Ti–6Al–4V meshes reinforced Al–6Mg alloy matrix composites

Multiple Impact Resistance of Hybrid Fiber Ultrahigh Toughness Cementitious Composites with Different Degrees of Initial Damage

Residual microstructure and damage geometry associated with high speed impact crater in Al 2O 3 and TiB 2 particles reinforced 2024 Al composite

Residual microstructure associated with impact crater in Ti-6Al-4V meshes reinforced 5A06Al alloy matrix composite.

Damage and Failure Analysis of Hybrid Laminates with Different Ply-Stacking Sequences under Low-Velocity Impact and Post-Impact Compression

Mechanical Characterization and Impact Damage Assessment of Hybrid Three-Dimensional Five-Directional Composites

Influence of UHMWPE fiber and Ti6Al4V metal surface treatments on the low-velocity impact behavior of thermoplastic fiber metal laminates

Fracture Behavior of a Composite Composed by Ti-aluminide Multi-Layered and Continuous-Sic F -Reinforced Ti-matrix

Study of Low-Velocity Impact Behavior of Hybrid Fiber-Reinforced Metal Laminates

Impact Resistance of 3D-Printed Continuous Hybrid Fiber-Reinforced Composites

Impact Resistance Study of Three-Dimensional Orthogonal Carbon Fibers/BMI Resin Woven Composites

The High-Strain-Rate Impacts Behaviors of Bilayer TC4-(GNPs/TC4) Composites with a Hierarchical Microstructure

Low-Velocity Impact Behavior and Damage Characteristics of CFRP Laminates

Impact response of thermoplastic composites – Experiments and modeling

Impact Response of Hybrid Carbon/glass Fibre Reinforced Polymer Composites Designed for Engineering Applications

Influence of Various Damage Mechanisms on the Low‐velocity Impact Response of Composite Laminates

Dynamic response characteristics of hybrid fiber metal laminates under inclined impact

Damage Behavior of Ti–6Al–4V Wire Mesh Reinforced 5A06 Alloy Matrix Composites under High Speed Impact