Abstract:ABSTRACTLarge amount of work has been published on the tacticity‐properties relationship of isotactic polypropylene (iPP). However, the stereo‐defect distribution dependence of morphology and mechanical properties of β‐nucleated iPP (β‐iPP) is still not clear. In this study, two different iPP resins (PP‐A and PP‐B) with similar average isotacticity but different uniformities of stereo‐defect distribution were selected, their β‐iPP injection molding specimens were prepared, and the morphology evolution and tensile behaviors were studied by means of differential scanning calorimetry (DSC), 2D wide‐angle X‐ray diffraction (2D‐WAXD) and scanning electron microscope (SEM). DSC results showed that with the same concentration of β‐nucleating agent (0.3 wt % WBG‐II), PP‐B with more uniform stereo‐defect distribution exhibited more amount of β‐phase than that of PP‐A with less uniform stereo‐defect distribution, indicating that PP‐B is more favorable for the formation of β‐phase. SEM results showed that PP‐B formed more amount of β‐crystals with relatively high structural perfection, while in PP‐A a mixed morphology of α‐ and β‐phase with obviously higher amount of structural imperfection emerges. The results of room‐temperature tensile test indicated that the yield peak width of PP‐B was obviously wider, and the elongation at break of PP‐B was higher than that of PP‐A, showing a better ductile of PP‐B. The morphology evolution results of SEM, 2D‐WAXD and DSC suggest that, a combination of lamellar deformation and amorphous deformation occurred in PP‐A, while only amorphous deformation mainly took place in PP‐B, which was thought to be the reason for the different tensile behaviors of the samples. In the production of β‐PP products via injection molding, the uniformity of stereo‐defect distribution was found to be an important factor. PP with more uniform distribution of stereo‐defect favors the formation of large amount of β‐phase with high perfection, which exhibit superior ductile property. The related mechanism was discussed. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2014, 131, 40027.

Investigation on Double Yielding Behavior under Tensile Loading in Isotactic Polypropylene

Deformation And Pore Formation Mechanism Under Tensile Loading In Isotactic Polypropylene

Yielding Behavior of Isotactic Polypropylene at Elevated Temperature Understood at the Spherulite Level

Double Yielding in Polymer Materials

Structural Origin of Double Yielding: the Critical Role of Crystallite Aggregate Heterogeneity

Effect of crystallinity level on the double yielding behavior of polyamide 6

Effects of Stereo-Defect Distribution on the Crystalline Morphology and Tensile Behavior of Isotactic Polypropylene Prepared by Compression Molding Process

Influence of lamellar structure on double yield behavior and pore size distribution in β nucleated polypropylene stretched membranes

Competition of shearing and cavitation effects on the deformation behavior of isotactic polypropylene during stretching

Double Yielding in PA6: Effect of Mold Temperature and Moisture Content

Real Time Synchrotron SAXS and WAXS Investigations on Temperature Related Deformation and Transitions of Β-Ipp with Uniaxial Stretching

Investigation on the Morphology and Tensile Behavior of Β‐nucleated Isotactic Polypropylene with Different Stereo‐defect Distribution

Crystallization Behavior of Isotatic Polypropylene under Shearing

Study on Structure and Property Relations of Α‐ipp During Uniaxial Deformation Via in Situ Synchrotron SAXS/WAXS and POM Investigations

Morphology and Mechanical Behavior of Isotactic Polypropylene with Different Stereo-Defect Distribution in Injection Molding

In situ studies on the temperature-related deformation behavior of isotactic polypropylene spherulites with uniaxial stretching: The effect of crystallization conditions

Investigation on Tensile Deformation Behavior of Semi-Crystalline Polymers

Investigation on the Tensile Behavior and Morphology Evolution of Isotactic Polypropylene Films Polymerized with Different Ziegler-Natta Catalysts

Deformation Behavior of Isotactic Polypropylene with Oriented Α- and Β-Crystals

Enhanced Melt-Recrystallization Process of Propylene-Ethylene Copolymer During the Uniaxial Stretching with the Aid of Isotactic Polypropylene

Evolution of Polymorphic Structure in Β-Nucleated Isotactic Polypropylene under a Certain Pressure: Effects of Temperature and Flow