Abstract:Products with complex free-form surfaces, such as aerospace impellers and automotive engines, are typically manufactured with ball-end milling. The machined surface topography is critical to these key components’ performance in harsh environments. Accurate prediction of the machined surface topography is essential to obtaining the optimized process parameters to achieve the best possible surface quality. An improved Z-MAP method based on the sequential quadratic programming (SQP) algorithm is proposed for efficient ball-end milling surface topography simulation in this paper. Compared to the traditional Z-MAP method, this improved method does not discretize the cutter edge and does not require a strict time-step limit. At each simulation time interval, the workpiece surface grid points falling into the cutting-edge instantaneous sweep polygon are searched to reduce the computation scale. An optimization problem, which combines these grid points’ coordinates with the cutting-edge trajectory model, is established for the accurate cutting time and cutting-edge element. The SQP algorithm is used to solve this optimization problem due to its global search capability. The surface topography is then updated by comparing the height of the cutting-edge element with the corresponding grid point. Experimental results indicate that the simulated surface topography is consistent with the measured surface topography. The proposed method achieves the same level of accuracy as the traditional method while requiring less computing time. The proposed method for fast surface topography in ball-end milling shows potential in optimizing process parameters to guarantee the surface quality of critical components.

Development of CAM System Based on Enhanced Z-map Model. A New Method of an Offset Surface Generation.

Non-redundant tool trajectory generation for surface finish machining based on geodesic curvature matching

Generation of offset surface for tool path in NC machining through level set methods

Mixed Tiny Path Smoothing Method Based on Sliding Convolution Windows for CNC Machining

A new toolpath generation method with feed sensitive zones inspection based on inverse evaluation mechanism.

A generic uniform scallop tool path generation method for five-axis machining of freeform surface.

A feedback toolpath generation method for compound trimmed surface with machine’s dynamic characteristics confined

Iso-Scallop Controlled Tool Path Generation for Free-Form Surfaces Based on Level Set Method

Expanding Development of End-Milling Tool Path Through Geometric Simulation

Numerical Control Tool-Path Generation for Subdivision Surface Using Toroidal Cutter on 5-Axis Machine Tool

The Tool Paths Generation Approach Based on Level-Set Methods in Die-Cavities NC Machining

Geometry Simulation and Evaluation of the Surface Topography in Five-Axis Ball-End Milling

Smooth contour-parallel tool path generation for high-speed machining through a dual offset procedure

Generating Efficient Toolpath by Cutter Posture Optimization in Five-Axis Machining Based on Inverse Feedback Mechanism

Research on Inverse Evaluation Mechanism in Toolpath Generation Based on Global Interpolation Simulation

Generating High-Accuracy Tool Path for 5-Axis Flank Milling of Globoidal Spatial Cam

An Improved Z-MAP Method Based on the SQP Algorithm for Fast Surface Topography Simulation of Ball-End Milling

Design of a CAM System for End Mills Based on Solid Modeling

A NEW TOOL PATH PLANNING MODEL OF COMPUTER AIDED MANUFACTURING (CAM) FOR FREEFORM SURFACES

A Computer Aided Testing System Based on Enhanced Z-map Modeling Method. Data Structure and Measuring for Primitive Shapes.

Systematic Study of the Prediction Methods for Machined Surface Topography and Form Error During Milling Process with Flat-End Cutter