Abstract:Intermetallics combining metal and ceramic properties exhibit colorfully complicated growth morphologies in solidification. Different from the solidus phase solidification, intermetallic solidification remains less understanding of the correlation between processing parameters and microstructure morphologies. In this paper, considering that; the intermetallic compound Al2Cu phase has well-known thermophysical properties available for the theoretical and experimental research, we carried out the directional solidification experiments and focused on an Al-Al2Cu hypereutectic alloy, where the Al2Cu phase was solidified as a primary phase. The primary Al2Cu phase growth behavior in the experiments included phase competition growth between coupled eutectic and primary phase, faceted phase transition and its change in growth morphology. By using a high thermal gradient directional solidification apparatus, the directionally solidified microstructures of Al-40%Cu (mass fraction) hypereutectic alloy were investigated and discussed based on the competition growth model. As the growth rate was changed abruptly from 10 mu m/s to 2 mu m/s, the microstructure transition from a primary Al2Cu dendrite plus interdendritic eutectic to an entirely coupled eutectic occurred due to the interface growth temperature of the coupled eutectic exceeding that of the primary Al2Cu dendrite. Also, the alloy liquid composition ahead of the solid/liquid interface approaching the eutectic point caused this microstructure transition. Simultaneously, in the changing growth rate experiments. the primary Al2Cu dendrites were firstly broken into small ones and then became the eutectic microstructure; it was interpreted rather by the decrease in liquid solute concentration ahead of the solid/liquid interface than by the effect of the thermal-solutal convection. Moreover, the morphology change in phase growth from faceted primary Al2Cu phase to non-faceted phase was observed by reducing abruptly the growth rate from 10 mu m/s to 2 mu m/s, which can be explained by the Jackson factor alpha decreasing with increasing the interface growth temperature of primary Al2Cu phase.

Ternary Eutectic Growth During Directional Solidification of Ag–Cu–Sb Alloy

Ternary Eutectic Growth in A Highly Undercooled Liquid Alloy

Dendritic and Eutectic Growth in Sb60Ag20Cu20 Ternary Alloy

Rapid Growth of Ternary Eutectic Un Der High Undercooling Conditions

Ternary Eutectic Growth In Microgravity Environment

Rapid Solidification Behaviour of Ag–Cu–Ge Ternary Eutectic Alloy

Ternary eutectic growth and associated tensile properties of directionally solidified Al87Si11Ni2 alloy

Rapid Solidification Mecha-Nism of Ag_(60)Sb_(34)Cu_(6) Ternaryalloy in Drop Tube

Nucleation and growth of βCu3Sb intermetallic compound in undercooled Cu–31% Sb eutectic alloy

Rapid Solidification Mechanism of Ag60Sb34Cu6 Ternary Alloy in Drop Tube

Exploring a better understanding of rapid growth mechanism of two ternary Pb-Sb-Sn alloys under changing degree of undercooling

Eutectic Microstructure Evolution of Directionally Solidified Nb-Ti-Si Base Ultrahigh Temperature Alloy

Dynamic Solidification Mechanism of Ternary Ag-Cu-Ge Eutectic Alloy under Ultrasonic Condition

Rapid solidification mechanism of highly undercooled ternary Cu 40 Sn 45 Sb 15 alloy

EFFECT OF AN ABRUPT GROWTH RATE ON PRIMARY Al_2Cu PHASE IN DIRECTIONAL SOLIDIFICATION OF Al-40%Cu HYPEREUTECTIC ALLOY

Eutectic Evolution of Directionally Solidified Nb-Si Based Ultrahigh Temperature Alloys

Effect of Ag Content on the Microstructure and Crystallization of Coupled Eutectic Growth in Directionally Solidified Al-Cu-Ag Alloys

Effect of Growth Rate on Microstructure Evolution and Hardness in Directionally Solidified Ti-50Al-6Nb Alloy

Effect of Growth Rate on Microstructure Evolution in Directionally Solidified Ti–47Al Alloy

A Study on Directional Solidification of in Situ Cu 0 8cr Alloy

Research on Lamellar Structure and Microhardness in Directionally Solidified Ternary Sn–40.5Pb–2.6Sb Eutectic Alloy