Abstract:The microstructural characteristics and morphological attributes of the target material, along with its intrinsic properties, can significantly influence the performance of the resultant film. Currently, commercially available nickel-vanadium targets employed in the industry have not been subjected to investigations aimed at controlling grain size and grain orientation. This study examines the effects of unidirectional rolling at room temperature, combined with substantial deformation, on the alterations in microstructure, texture evolution, and mechanical properties of the NiV7 alloy. The process of severe plastic cold rolling leads to a continuous elongation and refinement of the grains. The changes in microstructure and texture of the cold-rolled sheets were analyzed using electron backscatter diffraction (EBSD) technology. At an 80% reduction, a significant number of sub-grains are observed, which transform into deformed grains as the reduction reaches 95%. With a thickness reduction of 96.6%, the average grain size is approximately 1.10μm. Further increases in reduction do not lead to significant alterations in the grain structure; instead, the grain orientation progressively becomes more uniform with higher levels of deformation. The combination of substantial deformation and lower rolling rates results in an increased number of high-angle grain boundaries. The alloy displays various textures throughout the rolling process, including S-type, copper-type, brass-type, fiber, and cubic textures. Notably, the prevalence of S-type and fiber textures diminishes as the degree of deformation increases, while the cubic texture becomes increasingly prominent. Upon achieving a reduction of 95%, the cubic texture emerges as the dominant texture. A transmission electron microscope (TEM) was utilized to examine the extensive array of dislocations, dislocation cells, dislocation walls, and shear bands generated during the cold rolling process. At a deformation level of 96.6%, the ultimate tensile strength of the alloy demonstrates a significant enhancement, attributed to mechanisms of dislocation strengthening and grain strengthening, reaching a value of 1231±20 MPa, accompanied by a post-fracture elongation of approximately 2%. The ultimate tensile strength exhibited an increase of 781±20 MPa compared to the sample prior to the rolling process; however, there was a notable reduction in plasticity.

Microstructure Evolution and Hardness Variation of Pack-Rolled Nanocrystalline Nickel

Grain Orientation Induced Softening in Electrodeposited Gradient Nanostructured Nickel during Cold Rolling Deformation

Microstructure Evolution and Texture Characteristics of Pure Nickel N6 During Cold Rolling Process

Effect of Change in Strain Path During Cold Rolling on the Evolution of Microstructure, Texture And Hardness Properties of Nickel With Extremely Coarse Initial Grain Size

Mechanical Properties and Microstructure Evolution of Cold-Rolled Nano-Ni/Graphene Oxide Composite Foil

Microstructural Evolution and Its Influence on Creep and Stress Relaxation in Nanocrystalline Ni

Microstructure and texture evolution of pure nickel during cryorolling and subsequent annealing

Microstructural Evolution, Mechanical Properties and Thermal Stability of Gradient Structured Pure Nickel

A Crossover from Hardening to Softening in Nanocrystalline Ni by Annealing and Rolling

Effect of cross cold rolling and annealing on microstructure and texture in pure nickel

Effects of Strain on Recrystallization of Nickel Metals and Nanometals Produced by Heavy Cold Rolling

Microstructure Evolution in Bulk Nanostructured Copper During Repeated Cold Rolling

Superplasticity and Microstructure Evolution of Electrodeposited Nanocrystalline Nickel

Rolling Deformation Induced Reduction of Rate Sensitivity and Enhancement of Hardness in Nanocrystalline NiFe Alloys

Texture and Deformation Structure Evolution During Rolling of Individual Grains of Columnar Grain Nickel

Microstructural Evolution and Mechanical Properties of Rapidly Solidified Ni-Ge Alloys

Microstructure and Mechanical Properties of Nickel Processed by Accumulative Roll Bonding

Recrystallization Texture in Nickel Heavily Deformed by Accumulative Roll Bonding

Abnormal Grain Refinement and Synergistic Enhancement of Strength and Plasticity of High-Purity Nickel Via Cycle Skin-Pass Rolling Deformation

Recovery and Recrystallization as a Function of Deformed Microstructure Orientation in Coarse Grained Cold-Rolled Ni

Severe plastic cold rolling effects in Nickel-Vanadium alloy: Microstructure, texture evolution and mechanical properties