Abstract:Targeting the removal of Pb2+ in wastewater, cellulosic materials were carbonized in an aerobic environment and activated via ion exchange. The maximum adsorption capacity reached 243.5 mg/g on an MCC-derived adsorbent activated with sodium acetate. The modified porous properties improved the adsorption capacity. The capacity could be completely recovered five times through elution with EDTA. Because of the negative effects of Ni, Mg, and Ca elements, the adsorption capacities of activated carbonized natural materials were lower than that of pure cellulose. N2 adsorption measurement showed that the adsorbent had a large specific surface area as well as abundant micropores and 4-nm-sized mesopores. FTIR and surface potential results proved that carboxyl group was generated in the aerobic carbonization, and was deprotonated during ion exchange. This adsorbent consisted of C-C bonds as the building blocks and hydrophilic groups on the surface. XPS results demonstrated that the Pb 4f binding energies were reduced by 0.7-0.8 eV due to the interaction between Pb2+ and the activated adsorbent, indicating that the carboxylate groups bonded with Pb2+ through coordination interactions. Pseudo-second-order and Elovich kinetic models were well fitted with the adsorption processes on the pristine and activated carbonized adsorbents, indicative of chemisorption on heterogeneous surfaces. The Freundlich expression agreed well with the data measured, and the pristine and activated adsorbents had weak and strong affinities for Pb2+, respectively. The Pb2+ adsorption process was exothermic and spontaneous, and heat release determined the spontaneity. The adsorption capacity is attributed to the carboxylate groups and pores generated in the aerobic oxidation and ion exchange procedures.

Synthesis of Porous Lignin Xanthate Resin for Pb2+ Removal from Aqueous Solution

Synthesis, Characterization, and Utilization of Poly-Amino Acid Functionalized Lignin for Efficient and Selective Removal of Lead Ion from Aqueous Solution

Ultrasound-assisted xanthation of cellulose from lignocellulosic biomass optimized by response surface methodology for Pb(II) sorption.

Adsorption of lead ions using a modified lignin hydrogel

Insights into the Adsorption of Pb(II) over Trimercapto-S-triazine Trisodium Salt-Modified Lignin in a Wide Ph Range

Synthesis and adsorption behavior of a novel granular lignin adsorbent

Biomass-derived Porous Carbon Highly Efficient for Removal of Pb(II) and Cd(II)

Effective removal of heavy metals from water using porous lignin-based adsorbents

Fabrication of Lignin-based Magnetic Adsorbent via Thiol-ene Click Reaction for the Effective Removal of Pb(II)

Removal of Pb2+ from Aqueous Solutions by a High-Efficiency Resin

Efficient and selective removal of Pb(ii) from aqueous solution by a thioether-functionalized lignin-based magnetic adsorbent

Porous Lignin Based Poly (acrylic Acid)/organo-Montmorillonite Nanocomposites: Swelling Behaviors and Rapid Removal of Pb (II) Ions

Preparation and Pb2+ Removal Capacity of Phosphorylated Lignin

Preparation, characterization, and adsorption performance of porous polyamine lignin microsphere

Microwave-assisted Synthesis of High Carboxyl Content of Lignin for Enhancing Adsorption of Lead

Mechanisms and Valorization of Selective Adsorption of Sb(III) by Amino-Functionalized Lignin-Based Porous Biochar

Low-temperature aerobic carbonization and activation of cellulosic materials for Pb2+ removal in water source

Low-temperature aerobic carbonization and activation of cellulosic materials for Pb<SUP>2+</SUP> removal in water source

Insights into lead removal in water using a novel carbonized material derived from the by‐product of oil refining: action mechanism and performance optimization

Preparation of lignin modified hyper-cross-linked nanoporous resins and their efficient adsorption for p-nitrophenol in aqueous solution and CO2 capture

Fabrication of mesoporous lignin-based biosorbent from rice straw and its application for heavy-metal-ion removal.