Chemosynthesis and Structural Characterization of a Novel Lignin-Based Bio-Sorbent and Its Strong Adsorption for Pb (II)
Bing Wang,Jia-Long Wen,Shao-Long Sun,Han-Min Wang,Shuang-Fei Wang,Qiu-Yun Liu,Adam Charlton,Run-Cang Sun
DOI: https://doi.org/10.1016/j.indcrop.2017.06.013
IF: 6.449
2017-01-01
Industrial Crops and Products
Abstract:The removal of heavy metals ions from wastewater by an economic, high-effective, and environmentally friendly method is particularly important. In this study, an effective lignin-based bio-adsorbent (SAPL-1.5), which contained specific functional groups and spatial cross-linking structures, was synthesized through chemical modification. SAPL-1.5 was comprehensively characterized by 31P, 1H, 13C NMR, and elemental analysis as compared to the raw lignin. The results showed that the chemical reactivity of lignin was significantly improved after phenolation process, and the adsorption groups were successfully grafted onto lignin macromolecule. In addition, the influences of pH, SAPL-1.5 dosage, contact time, and initial Pb (II) concentration on the adsorption performance was systematically investigated. The highest adsorption capacity reached to 130.2mg/g (Pb (II), 140mg/L), and a removal efficiency of 100% was achieved (Pb (II), 20mg/L). Moreover, the adsorption isotherm and adsorption kinetics indicated that the results were fitting well with the Langmuir and pseudo-second-order model, respectively. Furthermore, the removal efficiency of SAPL-1.5 for Pb (II) (20mg/mL) still maintained over 85% after 5 cycles. Therefore, the lignin-based material obtained could be considered as a promising potential adsorbent with a low cost, high performance and reutilization for its application in the wastewater treatment process. It is believed that the lignin-based bio-sorbent can enlarge the lignin valorization in the current biorefinery process.