Abstract:In the present study, we synthesized a cationic lignosulfonate hydrogel (LS-g-P (AM-co-DAC)) by grafting acrylamide (AM) and acryloxyethyl trimethyl ammonium chloride (DAC) onto sodium lignosulfonate (LS) via free radical copolymerization. The solution pH, contact time, initial concentration, and temperature were comprehensively investigated through the static adsorption method for the adsorption behaviours of Cr(VI) by the hydrogel. The experimental results show that the best conditions were a temperature of 30°C, a dosage of 0.1 g, pH = 3, a concentration of 50 mg / L, and contact time = 2 h with removal efficiencies of above 70% and adsorption capacity of 18.14 mg·g-1. The adsorption process followed the Langmuir isothermal model, indicating monolayer adsorption, and the maximum adsorption capacity was 58.86 mg·g-1. Adsorption kinetics results show that the pseudo-second-order kinetic model dominated the adsorption process, and the adsorption activation energy was 5.489 kJ·mol-1. In addition, the adsorption involved spontaneous exothermic and entropy reduction. The combination of FT-IR, SEM, and XRD was used to characterize the structure and properties of the prepared hydrogel, and the adsorption mechanism was the result of electrostatic attraction, physical and chemical adsorption, and hydrogen bond. The hydrogel has good regenerative properties after desorption. Overall, this work synthesized an environmentally friendly biomass lignin-based hydrogel, which can be used as an adsorbent for the treatment of anionic pollutants, and explored a new method for the high-value utilization of industrial lignin.HighlightsNovel cationic lignosulfonate hydrogel (LS-g-P (AM-co-DAC)) was synthesized by a free radical method.SEM and XRD results confirmed the surface of the obtained hydrogel shows a 3D network structure and does not have a crystal structure.LS-g-P (AM-co-DAC) hydrogel adsorbent can selectively adsorb Cr6+ at pH 3.0.The adsorption conditions and the adsorption mechanism were studied in detail.Electrostatic interaction plays a key role in the adsorption of Cr6+.

Preparation of a new gel-type lignin-based cationic adsorption resin for efficient removal of Ca 2+ from aqueous solutions

Modified Native Cellulose Fibers-A Novel Efficient Adsorbent For Both Fluoride And Arsenic

Synthesis of a functional biomass lignin-based hydrogel with high swelling and adsorption capability towards Acid Red 73

Excellent Selectivity and High Capacity of As (V) Removal by a Novel Lignin-Based Adsorbent Doped with N Element and Modified with Ca2.

Effective removal of heavy metals from water using porous lignin-based adsorbents

Synthesis of cationic biomass lignosulfonate hydrogel for the efficient adsorption of Cr(VI) in wastewater with low pH

Aminated lignin by ultrasonic method with enhanced arsenic (V) adsorption from polluted water

Adsorption of Lead Ion from Wastewater Using Non-Crystal Hydrated Calcium Silicate Gel

Efficient Lead Ion Removal from Water by a Novel Chitosan Gel-Based Sorbent Modified with Glutamic Acid Ionic Liquid

Selective adsorption of ferulic acid and furfural from acid lignocellulosic hydrolysate by novel magnetic lignin-based adsorbent

A lignin-based composite hydrogel for the removal of heavy metal ions from aqueous solution

Multifunctional lignin-reinforced cellulose foam for the simultaneous removal of oils, dyes, and metal ions from water

Effective Removal of Calcium and Magnesium Ions from Water by a Novel Alginate–Citrate Composite Aerogel

Preparation and Adsorption Properties of Lignin/Cellulose Hydrogel

Synthesis of Cellulose–Poly(Acrylic Acid) Using Sugarcane Bagasse Extracted Cellulose Fibres for the Removal of Heavy Metal Ions

Amine-crosslinked lignin for water pollution attributable to organic dye remediation: Versatile adsorbent for selective dye removal and reusability

Mechanisms of Adsorption of Heavy Metal Cations from Waters by an Amino Bio-Based Resin Derived from Rosin

An Innovative Approach for the Synthesis of Grafted Copolyacrylic Xynosulfonate Sodium / Montmorillonite Gel for Effective Absorption of Heavy Metals from Aqueous Media

Lignocellulose-Based Superabsorbent Polymer Gel Crosslinked with Magnesium Aluminum Silicate for Highly Removal of Zn (II) from Aqueous Solution

Two approaches to prepare cationic lignin‐based adsorbents for efficient removal of phosphate ion from wastewater

The adsorption of Cs+ from wastewater using lithium-modified montmorillonite caged in calcium alginate beads