Abstract:There are intrinsic phase errors in swept source optical coherence tomography (SS-OCT), which severely influences the functional imaging. To overcome this difficulty, a numerical correction method is presented in this paper to correct the phase artifacts due to wavenumber shift among the spectral interferograms, resulting from the random delay variance between the sampling trigger and the clock of the swept source laser. This correction method is based on the linear relationship of phase difference to the depth of the sample and the wavenumber shift. The detailed procedure to eliminate the phase artifacts is as follows. Firstly, we figure out the complex OCT signals through inverse Fourier transform of the initial interferograms. Then we fit the upper surface of the sample with the intensity information of the B-scan by setting a floating threshold. After that the wavenumber shifts of each A-line are determined by two steps with the phase information of the sample surface: the relative wavenumber shifts between adjacent A-lines are first obtained according to the phase difference between the adjacent A-lines, the signal depth, and the linear relationship mentioned above; then we figure out the absolute wavenumber shifts between each A-line and the first A-line of the B-scan by an iteration algorithm. With the information about the wavenumber shift, we align the initial interferograms, and obtain the corrected complex signal through re-inverse Fourier transform of the aligned interferograms. This method introduces no extra noise, realizing phase measurement limited by the signal-to-noise ratio. It is noted that we take the average phase information of several axial pixels near the sample surface to diminish the noise influence when calculating the wavenumber shifts. Besides, this corrected algorithm acquires oversampling along the scanning direction to ensure the signal correlation between adjacent A-lines. The SS-OCT system in the paper is set up with a vertical cavity surface emitting laser with a center wavelength of 1297 nm. The system measurement range is 12 mm in lateral direction, the axial resolution is 17 mu m, and the lateral resolution is 24 mu m. And the feasibility of this method is verified by Doppler imaging of a mirror, an infra-red detection card and the cerebral cortex of a mouse.

Real-time Phase Error Compensation in Phase Sensitive Scanning Near-Field Optical Microscopy

A Novel Phase-Sensitive Scanning Near-Field Optical Microscope

Comparative analysis of mid-spatial frequency errors measurement using multiple phase retrieval algorithms

Optimization of Transverse Translation Diverse Phase Retrieval for Optical Elements with Mid-Spatial Frequency Errors

Phase Error Compensation and Accuracy Analysis for Phase Measurement Profilometry

Automatic Drift Compensation Using Phase Correlation Method for Nanomanipulation

Modern Scattering‐Type Scanning Near‐Field Optical Microscopy for Advanced Material Research

Phase error analysis and compensation for nonsinusoidal waveforms in phase-shifting digital fringe projection profilometry.

Error compensation for near optical coaxial phase measuring deflectometry with refraction error model

Improved Point Dipole Model for Subwavelength Resolution Scattering Near-Field Optical Microscopy (SNOM)

Postrecording Pixel-Reconstruction Approach for Correcting the Lateral Drifts in Surface Plasmon Resonance Microscope

Compensation of phase error in optical frequency-domain reflectometry using delay-matched sampling

Phase correction method based on interfacial signal in swept source optical coherence tomography

Quasi-pixelwise Motion Compensation for 4-Step Phase-Shifting Profilometry Based on a Phase Error Estimation

Analysis of Scattering-type Scanning Near-field Optical Microscopy for Residual-strain Measurements

Beyond phase error compensation: pixel mapping-based error correction for high-accuracy 3D surface measurement

Study on the Field Distribution of the Probes in Scanning Near-Field Optical Microscope Using Finite-Difference Time-Domain Calculations

Motion induced error reduction methods for phase shifting profilometry: A review

Correction of Aberration-Induced Phase Errors in Phase Measuring Deflectometry

(Invited) Near-Field Optics and Its Applications in Nanophotonic Devices: A Review

Correction Of Errors Due To Uneven Intensity Distribution And Inaccurate Phase Shifts In Prism-Based Simultaneous Phase-Shifting Interferometry