Abstract:A cost-effective approach to manufacture Carbon/Carbon composites is to infiltrate carbon fiber preforms with a polymer precursor and pyrolyze it to form the carbon matrix. During pyrolysis, the microstructure changes due to decomposition reactions creating a high degree of porosity consisting of interconnected network of voids and cracks. To densify, the pyrolyzed composite is infiltrated with polymer precursor to fill the porous network. The cycle of pyrolysis followed by infiltration is repeated until the porosity is minimized and the desired density is achieved. The permeability, porosity and viscosity of the polymer govern the infusion pressure and time for the re-infiltration steps. In this work, the permeability of benzoxazine-based Carbon/Carbon composites was measured for different degradation levels with three distinctly different pyrolyzing schedules. The samples were characterized systematically at increasing pyrolyzing temperatures until full conversion of the precursor into carbon matrix was achieved. The porosity of the material was evaluated by X-ray micro-computed tomography and by pycnometry. The through the thickness permeability of the composite was measured via a pulse-decay experiment after each heating step in the pyrolysis cycle. In this experiment pressure decay with time is recorded as air is evacuated from the cavity through the connected pathways of the porous network within the sample. The experimental correlation between the permeability and interconnected porosity of the microstructure is established. It is shown that the pulse-decay test with air effectively characterizes the permeability of the pyrolyzed composite.

Microstructure Of Pyrocarbon With Chemical Vapor Infiltration

Preparation of C/C Composites by Thermal Gradient Chemical Vapor Infiltration with Vaporized Kerosene As a Precursor

Deposition mechanism and microstructure of pyrocarbon prepared by chemical vapor infiltration with kerosene as precursor

Micro- and nano-structural investigations of C/C composites

Properties of Carbon Nano-Tubes–cf/sic Composite by Precursor Infiltration and Pyrolysis Process

Rapid Chemical Vapor Infiltration of C/C Composites

Deposition Kinetics and Mechanism of Pyrocarbon for Electromagnetic-Coupling Chemical Vapor Infiltration Process

Effect of Pyrocarbon Content in C/C Preforms on Microstructure and Mechanical Properties of the C/C–SiC Composites

Microstructure of the pyrocarbon in aligned carbon nanotube/carbon composites

PyC interphase growth mechanism and control models of C/SiC composites

Microstructure and Electrical Resistivity of Carbon/carbon Composites Prepared by Thermal Gradient Chemical Vapor Infiltration

The effect of carbon nanotubes on the microstructure and morphology of pyrolytic carbon matrices of C–C composites obtained by CVI

Kinetics of thermal gradient chemical vapor infiltration of large-size carbon/carbon composites with vaporized kerosene

Chemical Supercritical Fluid Infiltration of Pyrocarbon with Thermal Gradients: Deposition Kinetics and Multiphysics Modeling

Microstructures of a carbon-fiber-reinforced silicon-carbide composite produced by precursor pyrolysis and hot pressing

GROWTH CHARACTERS AND MODEL OF PYROLYTIC CARBON IN CHEMICAL VAPOR INFILTRATION PROCESS

Effect of chemical vapor infiltration on the flexural properties of C/C-SiC composites prepared by the precursor infiltration pyrolysis method

Correlation of the permeability and porosity development of carbon/carbon composites during pyrolysis

Improvement of Film Boiling Chemical Vapor Infiltration Process for Fabrication of Large Size C/C Composite

Improvement of Chemical Liquid Vaporized Infiltration Process for Fast Densification of Carbon/Carbon Composites

Molecular Insights into the Initial Formation of Pyrolytic Carbon Upon Carbon Fiber Surface