High-purity hydrogen production from real biomass pyrolysis vapors via a chemical looping process
Dewang Zeng,Shiliang Wu,Shaojun Ren,Fu Zhou,Ming Gao,Feng Song,Yunfei Zhai,Rui Xiao,zixiang Gao
DOI: https://doi.org/10.1039/d2se01635d
IF: 6.813
2023-04-04
Sustainable Energy & Fuels
Abstract:H 2 production from renewable bio-oil is a promising way to supply green hydrogen; however, this technology suffers from the high viscosity, high corrosiveness, and complex compositions of the bio-oil. Thus, in the present study, we propose a novel method that converts real biomass pyrolysis vapors into H 2 via a chemical looping process. Fe–Al–Ni composite oxide pellets were prepared in a simple and industrial way and then used as the oxygen carrier (OC), and their redox activity and cycle stability were assessed in a fixed-bed reactor system under different conditions with pine sawdust volatiles as the fuel. The results indicated that the Fe–Al–Ni composites exhibited nearly 99% CO 2 selectivity in the reduction stage and high H 2 purity (>98%) in the H 2 production stage when the redox temperature was higher than 850 °C. X-ray diffraction (XRD) analysis of the Fe–Al–Ni composite oxide pellets at different bed layers indicated that Fe 2 O 3 can be reduced to FeO by sawdust pyrolysis vapors, and an inert spinel phase of Fe–Al–O was formed concurrently. Coke deposited on the OC would hinder reduction, thereby decreasing the fuel conversion and H 2 energy efficiency, but it can be improved by increasing the pyrolysis temperature. Long cycling tests showed that a relatively stable H 2 energy efficiency of 20% and a H 2 purity of 98% could be obtained in whole tests; nevertheless, the conversion of CH 4 declined rapidly after 25 cycles, which could be attributed to the interior sintering, iron migration to the outer surface and garnet phase (Al 3 Fe 5 O 12 ) formation of the OC according to the scanning electron micrograph, micro texture, and XRD analysis of the OC with different cycling tests.
materials science, multidisciplinary,chemistry, physical,energy & fuels