Abstract:The centrifugal compressor is widely used for gas compression in various industrial fields such as aero-engine, gas turbine and turbocharger. However, the stable operating range is usually restricted by the occurrence of flow instability such as stall and surge. The paper experimentally examines the developing process of surge and stall occurring in a centrifugal compressor to advance the understanding on flow mechanism of flow instability. It is found that three types of pressure fluctuation can be observed at low flowrate region. At the critical point, the local stall firstly occurs in some specific diffuser passages and the enlarged local diffuser stall eventually induces the mild surge of compression system indicated by the sinusoidal pressure fluctuation. At lower mass flow rate, the diffuser stall cell begins to circumferentially propagate along the impeller rotating direction at 11% of rotor speed with the existence of mild surge. In comparative analysis of IGV pre-swirl angle on the occurrence of mild surge, the mild surge still occurs at the operating condition when the slope of the characteristic map of test stage is still obviously negative, in which the compression system is supposed to be stable in previous study. And a new suggested criterion for the prediction of mild surge is demonstrated that the occurrence of mild surge depends on the destabi-lization effect of downstream components about diffuser and volute. Combined with the experimental data, the streamwise distribution characteristic of diffuser stall can be used to develop the simplified model of lumped parameters for the analysis on the generation mechanism of the diffuser rotating stall. The quantitative investigation on the relation between the pressure-rise characteristic of subcomponents and the occurrence of mild surge and diffuser rotating stall not only advances the prediction of stability limit but also lays the theoretic foundation for controlling these unsteady behaviors to improve the operating range.

Fluid-structure Interaction Analysis and Lifetime Estimation of a Natural Gas Pipeline Centrifugal Compressor under Near-Choke and Near-Surge Conditions

Experimental investigation of transient characteristics of mild surge and diffuser rotating stall in a centrifugal compressor with vaned diffuser

Compressor Stability at Pulsating Condition Via Gas Dynamics Responses Analysis

Fatigue Analysis And Lifetime Estimation Of Centrifugal Compressor Impeller Blades

Study on the Inter-Stage Aerodynamic Interaction of a Natural Gas Pipeline Four-Stage Centrifugal Compressor

Numerical Investigation of Unsteady Flow and Alternating Stress of a Three-Stage Centrifugal Compressor

Fluid-structure interaction analysis and optimization study of suction valves in small refrigeration compressors

Computation of Stress Distribution in a Mixed Flow Pump Based on Fluid-Structure Interaction Analysis

Multidisciplinary Analysis Transient Flow Effects On The Impeller In A Semi-Open Centrifugal Impeller Stage

A Novel One-Dimensional–Three-Dimensional Coupled Method to Predict Surge Boundary of Centrifugal Compressors

PERFORMANCE ANAIYSIS OF INTERMEDIATE STAGE OF A MULTI-STAGE CENTRIFUGAL COMPRESSOR WITH MIXED GAS

Numerical Simulation Of Surge In A Centrifugal Compressor With Different Operating Condition Using The Plenum Model

Aerodynamic Instability Evolution of a Multi-Stage Combined Compressor

Quantification of Low-Cycle Fatigue Life for a Gas Turbine Compressor Vane Carrier under Varying Operating Conditions

Flow-Induced Vibratory Stress Prediction on Small Turbofan Engine Compressor Vanes Using Fluid-Structure Interaction Analyses

Experimental and Computational Investigation of A Centrifugal Compressor Stage

Numerical Investigation of Flow Evolution in Centrifugal Compressors During Surge

Investigation of Discharge Valve in Ultra-High-speed Rotary Compressors: an Experimental and FSI Simulation-Based Study

Application of CFD Method to Investigate the Evolution of the Thermodynamic Parameters of a Hyper Compressor and Its Pipelines

Vibrational responses and fatigue life of dynamic blades for compressor in gas turbines

On the elastic–plastic behaviors of centrifugal steam compressor impeller under cyclic thermomechanical loading