Abstract:Filter‐transfer methods of single‐walled carbon‐nanotube (SWNT) thin films have been widely employed to fabricate state‐of‐the‐art electronics and photonics devices with highly transparent and conductive electrodes; however, a challenge remains for all solution‐processable technologies to overcome substrates’ destruction due to their solvent incompatibility. Here, an advanced method of transferring SWNT thin films onto arbitrary material substrates by adopting chemically stable and flexible polytetrafluoroethylene (PTFE) membranes is reported. Filtrated SWNT thin films on PTFE membranes (PTFE@SWNTs) press‐freely adhere to not only flat but curved substrates by their solvent‐wettability and flexibility natures, and are spontaneously transferred after low‐temperature evaporation of the wet solvents and peeling of the PTFE membrane. SWNT thin films transferred onto polyethylene terephthalate films show sheet resistance values of ≈400 Ω □−1 at ≈90% transmittance, which are drastically decreased to ≈50 Ω □−1 at ≈65% from ≈100 Ω □−1 at ≈80%. The wet solvents are suitably displaced based on solvent‐compatibility experiments with the substrates. Topically, it is demonstrated that the solvent‐wetted PTFE@SWNT can be non‐destructively placed onto a perovskite (CH3NH3PbI3) substrate via the as‐displaced various organic solvents. A pre‐doping process of PTFE@SWNTs is possible by using a HNO3 aqueous solution. The HNO3‐doped SWNT thin film is successfully transferred onto the perovskite substrate. A versatile and convenient solution‐processed method for transferring single‐walled carbon nanotube (SWNT) thin films onto various substrates is reported. SWNT thin films are non‐destructively transferred onto the arbitrary shape and/or solvent‐sensitive materials such as a perovskite (CH3NH3PbI3) layer from them filtered through polytetrafluoroethylene (PTFE) membranes, PTFE@SWNTs. Furthermore, a pre‐doping process of SWNTs using HNO3 is possible using PTFE@SWNTs.

Metal-film-assisted ultra-clean transfer of single-walled carbon nanotubes

Transferable thin films of pristine carbon nanotubes.

Carbon Nanotubes Noncovalently Functionalized by an Organic-Inorganic Hybrid: New Building Blocks for Constructing Superhydrophobic Conductive Coatings

Nonaligned carbon nanotubes partially embedded in polymer matrixes: a novel route to superhydrophobic conductive surfaces.

Controllable Etching-Induced Contact Enhancement for High-Performance Carbon Nanotube Thin-Film Transistors

Rapid annealing and cooling induced surface cleaning of semiconducting carbon nanotubes for high-performance thin-film transistors

Creation of nanostructures with poly(methyl methacrylate)-mediated nanotransfer printing.

Clean, Fast and Scalable Transfer of Ultrathin/patterned Vertically-Aligned Carbon Nanotube Arrays

Ultraclean Transfer of Graphene by Mechanically Exfoliating Polymer with Modified Crosslink Density

Transfer printing approach to all-carbon nanoelectronics

Versatile Transfer of Aligned Carbon Nanotubes with Polydimethylsiloxane As the Intermediate.

Solution‐Processed Chemically Non‐Destructive Filter Transfer of Carbon‐Nanotube Thin Films onto Arbitrary Materials

Selective silencing of the electrical properties of metallic single-walled carbon nanotubes by 4-nitrobenzenediazonium tetrafluoroborate

Recycling Strategy for Fabricating Low-Cost and High-Performance Carbon Nanotube TFT Devices.

High-quality Graphene Transfer Via Directional Etching of Metal Substrates.

Solvent-free functionalization and transfer of aligned carbon nanotubes with vapor-deposited polymer nanocoatings

Order of magnitude improvement in the transport performance of carbon nanotube films by completely removing surfactants

The fabrication of a carbon nanotube transparent conductive film by electrophoretic deposition and hot-pressing transfer

Transferring vertically aligned carbon nanotubes onto a polymeric substrate using a hot embossing technique for microfluidic applications

Preparation of Large-Area, High-Performance Single-Walled Carbon Nanotube (Swcnt)-Based Heater Films by Roll-to-roll Gravure Printing

Retracted: Combined Printing of Highly Aligned Single‐Walled Carbon Nanotube Thin Films with Liquid Metal for Direct Fabrication of Functional Electronic Devices