Abstract:To get an optimized pulsed electrical plasma discharge reactor and to increase the energy utilization efficiency in the removal of pollutants, two hybrid plasma discharge reactors were designed and optimized. The reactors were compared via the discharge characteristics, energy transfer efficiency, the yields of the active species and the energy utilization in dye wastewater degradation. The results showed that under the same AC input power, the characteristics of the discharge waveform of the point-to-plate reactor were better. Under the same AC input power, the two reactors both had almost the same peak voltage of 22 kV. The peak current of the point-to-plate reactor was 146 A, while that of the wire-to-cylinder reactor was only 48.8 A. The peak powers of the point-to-plate reactor and the wire-to-cylinder reactor were 1.38 MW and 1.01 MW, respectively. The energy per pulse of the point-to-plate reactor was 0.2221 J, which was about 29.4% higher than that of the wire-to-cylinder reactor (0.1716 J). To remove 50% Acid Orange 7 (AO7), the energy utilizations of the point-to-plate reactor and the wire-to-cylinder reactor were 1.02 × 10−9 mol/L and 0.61 × 10−9 mol/L, respectively. In the point-to-plate reactor, the concentration of hydrogen peroxide in pure water was 3.6 mmol/L after 40 min of discharge, which was higher than that of the wire-to-cylinder reactor (2.5 mmol/L). The concentration of liquid phase ozone in the point-to-plate reactor (5.7 × 10−2 mmol/L) was about 26.7% higher than that in the wire-to-cylinder reactor (4.5 × 10−2 mmol/L). The analysis results of the variance showed that the type of reactor and reaction time had significant impacts on the yields of the hydrogen peroxide and ozone. The main degradation intermediates of AO7 identified by gas chromatography and mass spectrometry (GCMS) were acetic acid, maleic anhydride, p-benzoquinone, phenol, benzoic acid, phthalic anhydride, coumarin and 2-naphthol. Proposed degradation pathways were elucidated in light of the analyzed degradation products.

Degradation of Basic and Acid Dyes in High-Voltage Pulsed Discharge

Degradation of Acid Orange 7 Dye in Two Hybrid Plasma Discharge Reactors

Degradation of Dyes by Active Species Injected from A Gas Phase Surface Discharge

Synergistic Effects of Liquid and Gas Phase Discharges Using Pulsed High Voltage for Dyes Degradation in the Presence of Oxygen

Degradation And Discoloration Of Textile Dyes Using Gliding Arc Plasma Combined With Fenton Catalysis

Degradation of Dyeing Wastewater and Study of Electrode Corrosion with Gas-Liquid Gliding Arc Discharge

Treatment of Dye Wastewater by Using a Hybrid Gas/Liquid Pulsed Discharge Plasma Reactor

Pulsed Electrochemical Oxidation of Acid Red G and Crystal Violet by PbO2 Anode

Degradation of Dyeing Wastewater by Gas-liquid Gliding Arc Discharge

Evaluation of Energy Transfer and Utilization Efficiency of Azo Dye Removal by Different Pulsed Electrical Discharge Modes

Degradation of gas–liquid gliding arc discharge on Acid Orange II

Kinetic and Physiochemical Effects of Decolorization of AO7 Dye Wastewater by DBD

A Low-Voltage Pulse Electrolysis Method for the Degradation of Anthraquinone and Azo Dyes in Chloride Medium by Anodic Oxidation on Ti/IrO2 -Ruo2 -Sno2 Electrodes.

Decoloration of dyes by active species jet from gas phase surface discharge system

Highly energy-efficient degradation of simulated dye wastewater by array type underwater bubble discharge plasma: Key factors identification and degradation pathways

A study on dye wastewater by application of high impulse current

Decoloration of Azo Dye by a Multi-Needle-to-plate High-Voltage Pulsed Corona Discharge System in Water

Degradation of Acid Violet 19 textile dye by electro-peroxone in a laboratory flow plant

Study On Degradation Of Rb5 Dye By Pulse Discharge

Insights into mixed dye pollutant degradation by oxygen and air plasma bubbling array

Electrochemical Degradation of Acid Orange II Dye Using Mixed Metal Oxide Anode: Role of Supporting Electrolytes