Kinetic and Physiochemical Effects of Decolorization of AO7 Dye Wastewater by DBD

shang kefeng,wang xiaojing,lu na,li jie,jiang nan,wang zhiqiang
DOI: https://doi.org/10.13336/j.1003-6520.hve.20180828031
2018-01-01
Abstract:The conductivity of wastewater has little effect on the generation of hybrid gas/liquid dielectric barrier discharge(DBD), so the voltage applied on high-voltage electrode and the air discharge gap are two very important factors which influence the degradation of aqueous pollutants. We investigated the effect of applied voltage, air discharge gap, etc. on the discharge characteristics of DBD reactor and the degradation kinetics of acid orange Ⅱ(AO7), and analyzed the physiochemical effects responsible for AO7 degradation. The results indicate that the number of discharge filaments initiated from the high voltage electrode increases with the applied voltage, but decreases with the air discharge gap(s); moreover, some branches appear on the filamentous discharge channels when they are near the water surface. AO7 follows a pseudo first-order degradation kinetics, and the reaction kinetic constants increase with the applied voltage, but decrease with the air discharge gap. At an air discharge gap of 6 mm, the reaction kinetic constant is increased by about 4.45 times and 5.67 times when the applied voltage increases to 17 kV and 19 kV from 15 kV, respectively. At an applied voltage of 17 kV, the reaction kinetic constant at s of 4 mm and 2 mm is 3.51 times and 6.67 times that at s of 8 mm, respectively. The p H value of wastewater also influences the degradation of AO7, and it is found that AO7 degrades faster in acidic or basic wastewater than in neutral or nearly neutral condition. Experimental analyses show that the reactive species, including ozone and hydrogen peroxide, the important physiochemical effects produced from DBD plasma, are responsible for AO7 degradation.
What problem does this paper attempt to address?