Abstract:Present work investigates the application of pulsed electrochemical oxidation technique using DSA anode, titanium coated with PbO2layer, for degradation of Acid Red G (anionic dye) and Crystal Violet (cationic dye). Decolorization efficiency, COD and TOC removal efficiency were measured and contrasted by varying process parameters such as current density, initial organic concentration, pulse frequency, pulse duty cycle and NaCl dosage. Furthermore, decay kinetics for color and COD removal process, average current efficiency and energy consumption were evaluated under diverse arguments. The results indicated that current density, pulse duty cycle and NaCl dosage exerted a positive influence on the performance of pulse electrochemical degradation for ARG and CV, namely, with the growth of relevant influencing factors, the corresponding removal efficiency, kinetic constant of decolorization and COD removal reaction, and specific energy consumption increased accordingly, whereas the average current efficiency gradually decreased. However, the initial concentration of ARG and CV had a negative influence on the pulse electrochemical degradation process, that is, with the increase of initial dye concentration could lead to the reduction of the corresponding removal efficiency, kinetic constant of decolorization and COD removal reaction and energy consumption, on the contrary, the average current efficiency went up. Being different from ARG degradation process, there were some substances adhering to the cathode during CV electrochemical degradation process due to its positive charge. Under same conditions, the degradation indexes of pulse constant current power supply mode were better than those of direct constant current mode, which was coincident for both ARG and CV.

Electrochemical Degradation of Acid Orange II Dye Using Mixed Metal Oxide Anode: Role of Supporting Electrolytes

Heterogeneous Degradation of Orange II with Peroxymonosulfate Activated by Ordered Mesoporous MnFe2O4

Photodegradation of Orange Ii Using Waste Paper Sludge-Derived Heterogeneous Catalyst in the Presence of Oxalate under Ultraviolet Light Emitting Diode Irradiation

Degradation of Orange Ii by Electrochemical Activation of Persulfate: Performance and Mechanism

Electrochemical degradation of Acid Orange II dye with boron-doped diamond electrode: Role of operating parameters in the absence and in the presence of NaCl

New Insights into the Relationship Between Anode Material, Supporting Electrolyte and Applied Current Density in Anodic Oxidation Processes

Degradation of Acid Orange 7 in aqueous solution by a novel electro/Fe2+/peroxydisulfate process

Degradation of organic dye wastewater using polycarboxylic acid modified SR-Photo-Fenton

Degradation of Dyeing Wastewater and Study of Electrode Corrosion with Gas-Liquid Gliding Arc Discharge

Condition optimization and mechanism of internal electrolysis promoting the bio-degradation of Mordant Orange I

Electrochemically Assisted Photocatalytic Degradation of Orange Ii: Influence of Initial Ph Values

Degradation of acid orange ii solution by gas-liquid phase gliding arc discharge with TiO2 photocatalysis

Highly Efficient and Heterogeneous OMS-2 for the Directly Oxidative Degradation of Organic Dyes under Acidic Condition

Study on the Degradation Process of Photo-Assisted Electro-Catalytic Degradation of Azo Dye Acid Orange Ⅱ

Pulsed Electrochemical Oxidation of Acid Red G and Crystal Violet by PbO2 Anode

Degradation of azo dye Acid Orange II in aqueous solution by a micro-electrolysis system using a rotational-drum

Treatment of Dye Wastewater Containing Acid Orange II Using a Cell with Three-Phase Three-Dimensional Electrode

A Novel Fenton-like System of Fe2O3 and NaHSO3 for Orange II Degradation

Influence of cations during Orange-II degradation on boron-doped diamond electrode

Electrochemical oxidation of acid orange II under potentiostatic model

Electrochemical Oxidation of Acid Orange Ⅱ under Potentiostatic Model