Abstract:Although monoclinic WO3 is widely studied as a prototypical photoanode material for solar water splitting, limited success, hitherto, in fabricating WO3 photoanodes that simultaneously demonstrate high efficiency and reproducibility has been realized. The difficulty in controlling both the efficiency and reproducibility is derived from the ever-changing structures/compositions and chemical environments of the precursors, such as peroxytungstic acid and freshly prepared tungstic acid, which render the fabrication processes of the WO3 photoanodes particularly uncontrollable. Herein, a highly reproducible sol-gel process was developed to establish efficient and translucent WO3 photoanodes using a chemically stable ammonium metatungstate precursor. Under standard simulated sunlight of air mass 1.5 G, 100 mW cm−2, the WO3 photoanode delivered photocurrent densities of ca. 2.05 and 2.25 mA cm−2 at 1.23 V versus the reversible hydrogen electrode (RHE), when tested in 1 mol L−1 H2SO4 and CH3SO3H, respectively. Hence, the WO3 photoanodes fabricated herein are one of the WO3 photoanodes with the highest performance ever reported. The reproducibility of the fabrication scheme was evaluated by testing 50 randomly selected WO3 samples in 1 mol L−1 H2SO4, which yielded an average photocurrent density of 1.8 mA cm−2 at 1.23 VRHE with a small standard deviation. Additionally, the effectiveness of the ammonium metatungstate precursor solution was maintained for at least 3 weeks, when compared with the associated upper-limit values of peroxytungstic and tungstic acid based precursors after 3 d. This study presents a key step to the future development of WO3 photoanodes for efficient solar water splitting.

A simple route for preparation of textured WO 3 thin films from colloidal W nanoparticles and their photoelectrochemical water splitting properties

Novel route to WOx nanorods and WS2 nanotubes from WS2 inorganic fullerenes.

Preparation and characterization of a novel WO_3/W photoanode

Novel Route to WO<i><sub>x</sub></i>Nanorods and WS<sub>2</sub>Nanotubes from WS<sub>2</sub>Inorganic Fullerenes

A simple and rapid electrodeposition method to prepare seed layer of WOx on the ITO glass for solvothermal synthesis of WO3 nanowires film

One-Step Rapid and Scalable Flame Synthesis of Efficient WO3 Photoanodes for Water Splitting.

Novel Nanostructured WO 3 @Prussian Blue Heterojunction Photoanodes for Efficient Photoelectrochemical Water Splitting

Photoelectrochemical water splitting with porous α-Fe2O3 thin films prepared from Fe/Fe-oxide nanoparticles

Facile Preparation of Porous WO 3 Film for Photoelectrochemical Splitting of Natural Seawater

Facile Fabrication of Sandwich Structured WO3 Nanoplate Arrays for Efficient Photoelectrochemical Water Splitting.

Facile preparation of platelike tungsten oxide thin film electrodes with high photoelectrode activity.

Preparation of Surface Dispersed WO3/BiVO4 Heterojunction Arrays and Their Photoelectrochemical Performance for Water Splitting

Facile Synthesis of a Micro–Nano-Structured FeOOH/BiVO4/WO3 Photoanode with Enhanced Photoelectrochemical Performance

Preparation of Vertically Aligned WO3 Nanoplate Array Films Based on Peroxotungstate Reduction Reaction and Their Excellent Photoelectrocatalytic Performance

Characterization of Ultrasonic Spray Pyrolysis Deposited WO3 Thin Film for Photoelectrochemical Splitting of Water

Nanoporous WO3 Films Synthesized by Tuning Anodization Conditions for Photoelectrochemical Water Oxidation

Synthesis of WO3/BiVO4 photoanode using a reaction of bismuth nitrate with peroxovanadate on WO3 film for efficient photoelectrocatalytic water splitting and organic pollutant degradation

Composites Based on Electrodeposited WO3 and TiO2 Nanoparticles for Photoelectrochemical Water Splitting

Sol-gel Synthesis of Highly Reproducible WO3 Photoanodes for Solar Water Oxidation

A facile two-step method for fabrication of plate-like WO3 photoanode under mild conditions.

Nanostructured porous WO 3 for photoelectrochemical splitting of seawater