Abstract:Transmission components are the main mechanical elements in a machine system, the accuracy level of the transmission system is one of the major sources of the machining error of multiaxis machine tools. This article investigates motion error analysis, volumetric motion error model for transmission system and the accuracy allocation method for multiaxis machine tools during the early design stage. For this purpose, a transmission system volumetric motion error model, which is based on the motion error matrix and screw theory, is derived for mapping transmission components' error parameters to the volumetric motion errors of machine tools. The volumetric motion error matrix combines motion errors along the machine tools' kinematic chains. Subsequently, the volumetric motion error model is expressed as a volumetric motion error twist, which is formulated from the volumetric motion error matrix. Additionally, the transmission system volumetric motion error twist model is used as design criteria for accuracy optimum allocation, with constraints on the twist magnitude and design variable limits. Then, design optimization is performed by using a multiobjective nonlinear optimization technique to minimize the manufacturing cost and volumetric motion error twist pitch. To solve this multiple objective optimum problem, this study proposes an approach integrating Lagrange multiplier and gradient descent operator with non-dominated sorting genetic algorithm-II (NSGA-II). Modified non-dominated sorting genetic algorithm-II searches for an allocation scheme Pareto optimal front. Consequently, VlseKriterijumska Optimizacija I Kompromisno Resenje (VIKOR) determines the best compromise solution from the Pareto set. Finally, a numerical experiment for the optimal design of a numerical control machine tool is conducted, which highlights the advantages of the proposed methodology.

Accuracy synthesis of a multi-level hybrid positioning mechanism for the feed support system in FAST

Terminal Accuracy Analysis of a Multi-level Hybrid Support System Based on Time-varying Barycenter

Error Modeling and Accuracy Analysis of A Multi-Level Hybrid Support Robot

Transmission System Accuracy Optimum Allocation for Multiaxis Machine Tools' Scheme Design

Study on Telescope Gain Affected by a Multilevel Hybrid Mechanism in FAST

Kinematic Modeling and Error Parameter Identification of Automated Fiber Placement Machine Based on Measured Data

Terminal Accuracy of the Feed Support System in FAST

Trajectory Generation and Tracking Control of A Multi-Level Hybrid Support Manipulator in Fast

Synthetic Design and Analysis of the New Feed Cabin Mechanism in Five-hundred-meter Aperture Spherical Radio Telescope (FAST)

Accuracy Analysis of Stewart Platform Based on Interval Analysis Method

Geometric error propagation model based accuracy synthesis and its application to a 1T2R parallel manipulator

Dynamic Accuracy Analysis of a 5PSS/UPU Parallel Mechanism Based on Rigid-Flexible Coupled Modeling

Volumetric Error Modeling And Analysis For Cnc Machine Tool Based On Multi-Body System

Accuracy Synthesis of Stewart Platform Used in Testing System for Spacecraft Docking Mechanism

Error Analysis of the Cable-Driven Parallel Robot in the Upgraded Feed Cabin of FAST

A Modeling Method of the Cable Driven Parallel Manipulator for FAST

Kinematics Analysis of Active Reflector Supporting Mechanism for FAST

A New Source Finding and Tracking Analysis Approach for the Active Reflector of Five-Hundred-meter Aperture Spherical Telescope

Geometric accuracy design and error compensation of a one-translational and three-rotational parallel mechanism with articulated traveling plate

Accuracy Analysis of Spatial Overconstrained Extendible Support Structures Considering Geometric Errors, Joint Clearances and Link Flexibility

Dynamic error modeling and analysis of articulated arm coordinate measuring machine with integrated joint module