Abstract:5-Degree-of-freedom parallel kinematic machine tools are always attractive in manufacturing industry due to the ability of five-axis machining with high stiffness/mass ratio and flexibility. In this article, error modeling and sensitivity analysis of a novel 5-degree-of-freedom parallel kinematic machine tool are discussed for its accuracy issues. An error modeling method based on screw theory is applied to each limb, and then the error model of the parallel kinematic machine tool is established and the error mapping Jacobian matrix of 53 geometric errors is derived. Considering that geometric errors exert both impacts on value and direction of the end-effector's pose error, a set of sensitivity indices and an easy routine for sensitivity analysis are proposed according to the error mapping Jacobian matrix. On this basis, 10 vital errors and 10 trivial errors are identified over the prescribed workspace. To validate the effects of sensitivity analysis, several numerical simulations of accuracy design are conducted, and three-dimensional model assemblies with relevant geometric errors are established as well. The simulations exhibit maximal -0.10% and 0.34% improvements of the position and orientation errors, respectively, after modifying 10 trivial errors, while minimal 65.56% and 55.17% improvements of the position and orientation errors, respectively, after modifying 10 vital errors. Besides the assembly reveals an output pose error of (0.0134 mm, 0.0020 rad) with only trivial errors, while (2.0338 mm, 0.0048 rad) with only vital errors. In consequence, both results of simulations and assemblies validate the correctness of the sensitivity analysis. Moreover, this procedure can be extended to any other parallel kinematic mechanisms easily.

Geometric error propagation model based accuracy synthesis and its application to a 1T2R parallel manipulator

Accuracy Synthesis of the TriMule Hybrid Robot

Error Analysis and Modeling of Monolithic Micromanipulator

Position error modeling and accuracy evaluation of n-DoF translational parallel manipulators that can be transformed into n four-bar mechanisms based on motion/force transmissibility

Error modeling and accuracy evaluation of parallel manipulators with mixed DoFs based on motion/force transmissibility and constrainability

Accuracy Synthesis of A 3-Prs Parallel Manipulator Based on Genetic Algorithms

A General Approach for Geometric Error Modeling of Lower Mobility Parallel Manipulators

Geometric accuracy design and error compensation of a one-translational and three-rotational parallel mechanism with articulated traveling plate

Error Modeling and Accuracy Analysis of a Novel 3-DOF Parallel Machine Tool

Dynamic Accuracy Analysis of a 5PSS/UPU Parallel Mechanism Based on Rigid-Flexible Coupled Modeling

A New Kinematic Error Modelling and Identification Method of the Parallel Manipulator

Error Modeling for the 3-UPU Parallel Manipulator in Terms of Joint Clearance and Link Deformation

Study on the Accuracy of 3-RPS Parallel Machine Tools

The Measurement Of Kinematic Accuracy For Various Configurations Of Parallel Manipulators

Error modeling and sensitivity analysis of a novel 5-degree-of-freedom parallel kinematic machine tool

Allocation of Geometrical Errors for Developing Precision Measurement Machine

Kinematic Accuracy Research of 2(3HUS+S) Parallel Manipulator for Simulation of Hip Joint Motion.

Accuracy Synthesis of a 3-RPS Parallel Robot Based on Manufacturing Costs

Elasto-geometrical Error Modeling and Compensation of a Five-Axis Parallel Machining Robot

Geometric error modeling and source error identification methodology for a serial–parallel hybrid kinematic machining unit with five axis

A Unified Approach to the Accuracy Analysis of Planar Parallel Manipulators Both with Input Uncertainties and Joint Clearance