Abstract:The design of tin-based anode materials (SnO2 or Sn) has become a major concern for lithium ion batteries (LIBs) owing to their different inherent characteristics. Herein, particulate SnO2 or Sn crystals coupled with porous N-doped carbon nanofibers (denoted as SnO2/PCNFs and Sn/PCNFs, respectively) are fabricated via the electrospinning method. The electrochemical behaviors of both SnO2/PCNFs and Sn/PCNFs are systematically investigated as anodes for LIBs. When coupled with porous carbon nanofibers, both SnO2 nanoparticles and Sn micro/nanoparticles display superior cycling and rate performances. SnO2/PCNFs and Sn/PCNFs deliver discharge capacities of 998 and 710 mA h g(-1) after 140 cycles (at 100, 200, 500 and 1000 mA g(-1) each for 10 cycles and then 100 cycles at 100 mA g(-1)), respectively. However, the Sn/PCNF electrodes show better cycling stability at higher current densities, delivering higher discharge capacities of 700 and 550 mA h g(-1) than that of SnO2/PCNFs (685 and 424 mA h g(-1)) after 160 cycles at 200 and 500 mA g(-1), respectively. The different superior electrochemical performance is attributed to the introduction of porous N-doped carbon nanofibers and their self-constructed networks, which, on the one hand, greatly decrease the charge-transfer resistance due to the high conductivity of N-doped carbon fibers; on the other hand, the porous carbon nanofibers with numerous voids and flexible one-dimensional (1D) structures efficiently alleviate the volume changes of SnO2 and Sn during the Li-Sn alloying-dealloying processes. Moreover, the discussion of the electrochemical behaviors of SnO2vs. Sn would provide new insights into the design of tin-based anode materials for practical applications, and the current strategy demonstrates great potential in the rational design of metallic tin-based anode materials.

A Dealloying Approach to Synthesizing Micro-Sized Porous Tin (sn) from Immiscible Alloy Systems for Potential Lithium-Ion Battery Anode Applications

Dealloying-Derived Nanoporous Cu6Sn5 Alloy as Stable Anode Materials for Lithium-Ion Batteries

Two‐step dealloying approach to synthesize hierarchically porous nickel‐tin alloy towards long‐life lithium ion batteries

The self-assembly of porous microspheres of tin dioxide octahedral nanoparticles for high performance lithium ion battery anode materials

Chemical Prelithiation/Presodiation Strategies Toward Controllable and Scalable Synthesis of Microsized Nanoporous Tin at Room Temperature for High‐Energy Sodium‐Ion Batteries

Non-aqueous Electrodeposition of Porous Tin-Based Film As an Anode for Lithium-Ion Battery

Stable anodes for lithium-ion batteries based on tin-containing silicon oxycarbonitride ceramic nanocomposites

Metallic Tin Nanoparticle-Reinforced Tin-Doped Porous Silicon Microspheres with Superior Electrochemical Lithium Storage Properties

Facile Synthesis of Fesn2 Alloy Nanoparticles As Anode Materials for Lithium-Ion Batteries

Advanced Structures in Electrodeposited Tin Base Anodes for Lithium Ion Batteries

Facile Synthesis of Ultrasmall Tin Oxide Nanoparticles Embedded in Carbon As High-Performance Anode for Lithium-Ion Batteries

Facile synthesis and electrochemical properties of porous SnO2 micro-tubes as anode material for lithium-ion battery

Hydrothermal synthesis and electrochemical properties of nano-sized Co–Sn alloy anodes for lithium ion batteries

Synthesis of SnO2versus Sn Crystals Within N-doped Porous Carbon Nanofibers Via Electrospinning Towards High-Performance Lithium Ion Batteries

Realizing Ultrathin LiSn Alloy Anode by Tuning the Wettability of Molten Li for High-Energy-Density Batteries

Li Storage in 3D Nanoporous Au‐Supported Nanocrystalline Tin

Circumventing chemo-mechanical failure of Sn foil battery anode by grain refinement and elaborate porosity design

Uniform integration of amorphous SnO2 nanoparticles encapsulated into the carbon matrix as enhanced electrochemical performance anodes for lithium-ion batteries

A Nano-Rattle SnO2@carbon Composite Anode Material for High-Energy Li-ion Batteries by Melt Diffusion Impregnation

A simple fabrication of porous carbon@tin dioxide as anode material for achieving lithium-ion batteries with high performance

Reversible formation of metastable Sn-rich solid solution in SnO<sub>2</sub>-based anode for high-performance lithium storage