Abstract:Bi2Te3-based materials are dominating thermoelectrics for almost all of the room-temperature applications. To meet the future demands, both their thermoelectric (TE) and mechanical properties need to be further improved, which are the requisite for efficient TE modules applied in areas such as reliable micro-cooling. The conventional zone melting (ZM) and powder metallurgy (PM) methods fall short in preparing Bi2Te3-based alloys, which have both a highly textured structure for high TE properties and a fine-grained microstructure for high mechanical properties. Herein, a mechanical exfoliation combined with spark plasma sintering (ME-SPS) method is developed to prepare Bi0.5Sb1.5Te3 with highly improved mechanical properties (correlated mainly to the dislocation networks), as well as significantly improved thermoelectric properties (correlated mainly to the texture structure). In the method, both the dislocation density and the orientation factor (F) can be tuned by the sintering pressure. At a sintering pressure of 20 MPa, an exceptional F of up to 0.8 is retained, leading to an excellent power factor of 4.8 mW m-1 K-2 that is much higher than that of the PM polycrystalline. Meanwhile, the method can readily induce high-density dislocations (up to ∼1010 cm-2), improving the mechanical properties and reducing the lattice thermal conductivity as compared to the ZM ingot. In the exfoliated and then sintered (20 MPa) sample, the figure-of-merit ZT = 1.2 (at 350 K), which has increased by about ∼20%, and the compressive strength has also increased by ∼20%, compared to those of the ZM ingot, respectively. These results demonstrate that the ME-SPS method is highly effective in preparing high-performance Bi2Te3-based alloys, which are critical for TE modules in commercial applications at near-room temperature.

Fast Preparation and High Thermoelectric Performance of the Stable Bi 0.5 Sb 1.5 Te 3 Bulk Materials for Different Synthesis Pressures

Investigation of Electrical Transport Properties of Bi0.5sb1.5te2.7se0.3 Alloys Prepared by High-Pressure Method

Thermoelectric transport properties and crystal growth of BiSbTe 3 bulk materials produced by a unique high-pressure synthesis

Thermoelectric and thermomechanical properties of the hot pressed polycrystalline Bi0.5Sb1.5Te3 alloys

High-press preparation and thermoelectric properties of Bi0.90Sb0.10

Enhancing the Thermoelectric and Mechanical Properties of Bi<sub>0.5</sub>Sb<sub>1.5</sub>Te<sub>3</sub> Modulated by the Texture and Dense Dislocation Networks

Enhancing the Thermoelectric and Mechanical Properties of Bi 0.5 Sb 1.5 Te 3 Modulated by the Texture and Dense Dislocation Networks

Low Thermal Conductivity and High Figure of Merit for Rapidly Synthesized N-Type Pb1-xBixTe Alloys

Improved Thermoelectric Properties of Bi2Te3−xSexalloys by Melt Spinning and Resistance Pressing Sintering

High Thermoelectric Performance Bismuth Telluride Prepared by Cold Pressing and Annealing Facilitating Large Scale Application

Critical Role of Tellurium Self-Compensation in Enhancing the Thermoelectric Performance of P-Type Bi0.4Sb1.6Te3 Alloy

Pressure-induced electrical transport properties, texture, and microstructure of the (Bi,Sb)2Te3 alloys

Double Effects of High Pressure and Sb Doping Content on Thermoelectric Properties of Bi2Te3-based Alloys

High-Performance P-Type Bi2Te3-Based Thermoelectric Materials Enabled Via Regulating Bi-Te Ratio

High Pressure Drives Microstructure Modification and zT Enhancement in Bismuth Telluride-Based Alloys

Microstructure and Thermoelectric Properties of Bi0.5Na0.02Sb1.48-xInxTe3alloys Fabricated by Vacuum Melting and Hot Pressing

Simultaneously Improved Thermoelectric and Mechanical Properties Driven by MgB2 Doping in Bi0.4Sb1.6Te3 Based Alloys

Enhanced Thermoelectric Properties Obtained by Compositional Optimization in P -Type Bi X Sb 2− X Te 3 Fabricated by Mechanical Alloying and Spark Plasma Sintering

Achieving Superior Performance in Thermoelectric Bi0.4Sb1.6Te3.72 by Enhancing Texture and Inducing High-Density Line Defects

Enhanced Thermoelectric and Mechanical Performances in Sintered Bi0.48Sb1.52Te3-AgSbSe2 Composite.

Cold-Sintered Bi 2 Te 3 -Based Materials for Engineering Nanograined Thermoelectrics