Abstract:Inverted polymer solar cells (PSCs) with high open-circuit voltages of 1.00-1.06 V are fabricated by using an indenofluorene-containing copolymer (PIFTBT8) as an electron donor material and [6,6]-phenyl-C71-butyric acid methyl ester (PC71BM) as an electron acceptor material. To improve the photovoltaic performance, interface control of various low-temperature processed ZnO films as cathode buffer layers is systematically investigated for effective electron transportation, while transition metal oxides including MoO3, WO3, NiO, and Cu2O are employed as anode buffer layers for hole-extraction. Incorporation of optimized semiconducting metal oxide interlayers can minimize interfacial power losses, which thus affords large open-circuit voltages (V-oc), increased short-circuit current densities (J(sc)), and fill factors (FF), eventually contributing to higher power conversion efficiencies (PCEs) as well as better device stability. Due to the improved interfacial contacts and fine-matching energy levels, inverted PSCs with a device configuration of ITO/ZnO/PIFTBT8:PC71BM/MoO3/Ag exhibit a high PCE of 5.05% with a large V-oc of 1.04 V, a J(sc) of 9.74 mA cm(-2), and an FF of 50.1%. For the single junction inverted PSCs with efficiencies over 5.0%, 1.04 V is the largest V-oc ever achieved. By controlling the processing conditions of the active layer, the V-oc can further be improved to 1.05 and 1.06 V, with PCEs of 4.70% and 4.18%, respectively. More importantly, the inverted PSCs are ascertained to maintain a PCE of 4.55% (>90% of its initial efficiency) and a V-oc, of 1.05 V over 180 days, demonstrating good long-term stability, which is much better than that of the conventional devices. The results suggest that the interface engineering of metal oxide interlayers is an important strategy to develop PSCs with good performance.

Overcoming the Thickness Paradox: Systematical Optimization of Inverted Polymer Solar Cells

Analysis of the Effect of Active Layer Thickness on Polymer Solar Cell Performance Based on Optical and Opto-Electronic Model

Self-organization of amine-based cathode interfacial materials in inverted polymer solar cells.

High-performance inverted polymer solar cells: Device characterization, optical modeling, and hole-transporting modifications

Interface Control of Semiconducting Metal Oxide Layers for Efficient and Stable Inverted Polymer Solar Cells with Open-Circuit Voltages over 1.0 Volt

Physically Adsorbed Fullerene Layer on Positively Charged Sites on Zinc Oxide Cathode Affords Efficiency Enhancement in Inverted Polymer Solar Cell.

High Efficiency Layer‐by‐Layer All‐Polymer Solar Cell Enabled by Bottom‐Layer Optimization

Synergistic optimization of interfacial energy-level alignment and defect passivation toward efficient annealing-free inverted polymer solar cells

Versatile Device Architectures for High-Performing Light-Soaking-Free Inverted Polymer Solar Cells

Designing Thickness-Insensitive Cathode Interlayers via Constructing Noncovalently Conformational Locks for Highly Efficient Non-fullerene Organic Solar Cells

Optimizing the Morphology of All-Polymer Solar Cells for Enhanced Photovoltaic Performance and Thermal Stability

Layer‐by‐Layer All‐Polymer Solar Cells Approaching 19% with Dual‐Donor Modulation of an Interpenetrating Network

Precise Control of Hole Transport Layer Integration on PDTS-DTTFBT: PC71BM Organic Solar Cells

Understanding the PEDOT:PSS, PTAA and P3CT-X Hole-Transport-Layer-Based Inverted Perovskite Solar Cells

19.10% Efficiency and 80.5% Fill Factor Layer‐by‐Layer Organic Solar Cells Realized by 4‐Bis(2‐thienyl)pyrrole‐2,5‐Dione Based Polymer Additives for Inducing Vertical Segregation Morphology

Vertically Optimized Phase Separation with Improved Exciton Diffusion Enables High-Efficiency Organic Solar Cells with Thick Active Layers

Manipulation of Zinc Oxide with Zirconium Doping for Efficient Inverted Organic Solar Cells

Optimization of the Active Layer Thickness for Inverted Ternary Organic Solar Cells Achieves 20% Efficiency with Simulation

Enhanced power-conversion efficiency in polymer solar cells using an inverted device structure

Simultaneous improvement of efficiency and stability of inverted organic solar cell via composite hole transport layer

Surface Regulation with Polymerized Small Molecular Acceptor Towards Efficient Inverted Perovskite Solar Cells