Abstract:This study proposes a miniaturized refractometer with adjustable sensitivity that incorporates a reflective prism linked to a pair of precision-aligned fibers. An incident beam emanating from a single-mode fiber (SMF) undergoes Fresnel reflection at the interface between a slanted sensing facet of the prism and the aqueous solution under test and is properly steered via an aspheric mirror facet of the prism toward a multi-mode fiber (MMF). The refractive index (RI) of the solution can be accurately measured by observing the optical power. The sensitivity and sensing range with respect to the RI may be flexibly adjusted by tailoring the wedge angle of the prism. The proposed refractometer has been designed through rigorous simulations then constructed by integrating an appropriate prism in polycarbonate to both an SMF and MMF imbedded in a silicon chip. The embodied refractometric sensor was practically applied to inspect an aqueous sucrose solution, whose RI was varied from 1.3166 to 1.4029 for 1550 nm. As for the major achieved performance, the sensitivity ranged up to 54.6 per refractive index unit (RIU) while the resolution was as small as $9.95\times 10^{\hbox{--} 6}$ RIU. The sucrose solution could be efficiently in situ monitored to provide a minimum detectable RI change of 0.0001.

An In-Line Optical Fiber Refractometer with Porous Thin Film Coating

Optofluidic Refractive Index Sensor Based on Partial Reflection

Ultra compact and sensitive optical fiber interferometric refractive index sensor

In-Line Fiber Fabry-Perot Refractive-Index Tip Sensor Based on Endlessly Photonic Crystal Fiber

Highly sensitive refractive index sensor with fiber in-line Fabry-Perot interferometers based on vernier effect

A Miniature Fiber-Optic Refractive-Index Sensor Based on Laser-Machined Fabry-Perot Interferometer Tip

Fiber optic refractive index sensor using optofluidic anti-resonant reflecting guidance

Laser-Machined Miniature Fiber-Optic Refractive-Index Sensor Tip

Microfluidic Refractive Index Sensor Based on an All-Silica In-Line Fabry-Perot Interferometer Fabricated with Microstructured Fibers.

In-line fiber-optic Fabry-Perot refractive-index tip sensors

Optical Fiber Sensor Based on Capillary Wall for Highly-Sensitive Refractive Index Measurement

Refractive Index Sensor Based on a Microhole in Single-Mode Fiber Created by the Use of Femtosecond Laser Micromachining

Refractive Index Sensor Based on No-Core Fiber With Optoelectronic Oscillator Interrogation

A Compact All Fiber Refractive Index Sensor Based on Modal Interference

Refractive Index Sensor Using Microfiber-Based Mach-Zehnder Interferometer

Refractive Index Sensor Based on Θ-Shaped Microfiber Resonator and Vernier Effect

Fiber-Optic Refractometer Based on a Reflective Aspheric Prism Rendering Adjustable Sensitivity

Optical Refractive Index Sensor Based on Microfiber Fabry-Perot Interferometer

Refractive index measurement using photonic crystal fiber-based Fabry-Perot interferometer.

Refractive Index Sensor Based on Double Side-Polished U-Shaped Plastic Optical Fiber