Abstract:(Bi0.5Na0.5)TiO3 (BNT) based ceramics have been restricted by the drawback of the low depolarization temperature T-d and ferroelectric-to-relaxor transition temperature TF-R. Many works have confirmed conventional improving strategies like doping and forming solid solution are not efficient to solve the problem. To overcome this obstacle, we introduced semiconductor ZnO into 0.93(Bi0.5Na0.5)TiO3-0.07Ba(Ti-0.945 Zr-0.055)O-3:xZnO matrix to prepare 0-3 type ceramic composites (abbreviated as BNTBZT:xZnO). Energy disperse spectroscopy (EDS) result reveals that there are two distributions of Zn. Most of Zn2+ ions gather around the boundaries of BNT-BZT grains to form ZnO enrichment regions, and the others diffuse into the lattice. In consideration of the fact that the distribution of Na also appears to be separated, a new model on the Na migration is proposed to explain experimental results. Both the substitution of lower valent Zn2+ ions at B site and the migration of Na are benefit for the formation of oxygen vacancies. As a consequence, the coercive field E-c and mechanical quality factor Q(m) have been significantly promoted. In terms of depolarization behavior, the temperature-dependent P-E loops show a completely different polarization process after ZnO incorporation. A slower decay of the remnant polarization P-r indicates ferroelectric state is more stable in the composites. The influence of internal bias field on asymmetric P-E loop has been discussed. The experiments on thermally stimulated depolarization current (TSDC) and temperature-dependent dielectric permittivity demonstrate T-d and TF-R increase about 17 degrees C and 19 degrees C, respectively. Our research confirms forming ZnO composites is an effective method to improve depolarization behavior, and BNT-BZT:xZnO composites should be an alternative for application in electromechanical devices. (C) 2018 Elsevier B.V. All rights reserved.

Enhanced depolarization temperature in 0.90NBT–0.05KBT–0.05BT ceramics induced by BT nanowires

Enhancing Electrical Properties of High-Curie Temperature Piezoelectric Ceramics BNT-PZT and Their Mechanism

Facile Preparation and Performance of Novel High-Tc Xbi(ni1/2ti1/2)o3-(1-x)pb(zr1/2ti1/2)o3 Piezoceramics

Origin of enhanced depolarization temperature in quenched Na0.5Bi0.5TiO3-BaTiO3 ceramics

Significant Increase of Curie Temperature and Large Piezoelectric Coefficient in Ba(Ti0.80zr0.20)O-3-0.5(Ba0.70ca0.30)Tio3 Nanofibers

High electrostrictive properties and energy storage performances with excellent thermal stability in Nb-doped Bi0.5Na0.5TiO3-based ceramics

Improved Depolarization Behavior and Electric Properties in (Bi0.5na0.5)tio3-Based Piezoelectric Composites

Comprehensive Optimization of Piezoelectric Coefficient and Depolarization Temperature in Mn-doped Bi0.5Na0.5TiO3-Bi0.5K0.5TiO3-BaTiO3 Lead-Free Piezoceramics

Enhancement of Piezoelectric Performance in (Bi1/2na1/2)tio3-Based System Through Single-Crystallization

Large electric field-induced strain and antiferroelectric behavior in (1-x)(Na0.5Bi0.5)TiO3-x BaTiO3 ceramics

Temperature-Dependent Electrical Properties Of 0.94bi(0.5)Na(0.5)Tio(3)-0.06batio(3) Ceramics

The temperature-dependent electrical properties of Bi 0.5Na 0.5TiO 3-BaTiO 3-Bi 0.5K 0.5TiO 3 near the morphotropic phase boundary

Enhanced Piezoelectric Properties and Depolarization Temperature in Textured (Bi0.5na0.5)tio3-Based Ceramics Via Homoepitaxial Templated Grain Growth

Excellent Thermal Stability and Enhanced Piezoelectric Performance of Bi(Ni2/3Nb1/3)O3-modified BiFeO3-BaTiO3 Ceramics

Na1/2Bi1/2TiO3‐based ceramics with increased depolarization temperature and piezoelectric coefficient

Effect of BaTiO3 Particles with Different Shape on Electrical Properties of (bi0.5na0.5)tio3 Piezoceramics

The Temperature-Dependent Electric Properties of ZnO-doped Bi0.5Na0.5TiO3–BiCoO3 Lead-Free Piezoceramics

Temperature-Dependent Electrical Properties of 0.94Bi<sub>0.5</sub>Na<sub>0.5</sub>TiO<sub>3</sub>-0.06BaTiO<sub>3</sub>Ceramics

Evolutions of Dielectric, Ferroelectric, and Piezoelectric Properties with Temperature in a Nonergodic BNT-BT-KNN Single Crystal

(Bi0.5Na0.5)TiO3 ferroelectric ceramics: Achieving high depolarization temperature and improved piezoelectric properties

Morphotropic Phase Boundary in (1-X)bi0.5na0.5tio3-x(bi0.8la0.2)feo3 with Improved Depolarization Temperature