Abstract:This chapter builds on the work of Zhang and Wang (2012) to present the formulation of a unique model that (1) achieves the simulation of post-liquefaction shear deformation based on its physics, allowing the unified description of pre- and post-liquefaction behaviour of sand; (2) directly links the cyclic mobility of sand with reversible and irreversible dilatancy, enabling the unified description of monotonic and cyclic loading; (3) introduces critical state soil mechanics concepts to achieve unified modelling of sand under different states. Modelling of large post-liquefaction shear deformation is achieved based on the physics proposed by Zhang and Wang. The proposed model is able to appropriately describe some important features of sand, including dilatancy during loading and unloading, and softening of dense sand. The model is first described in triaxial stress space, and then generalized into multiaxial stress space with three dimensional mapping rules for the calculation of plasticity and dilatancy. The determination of the model parameters is described. The cutting-plane stress integration scheme and the Pegasus procedure for the three dimensional implementation of the model into the finite-element framework OpenSees (McKenna and Fenves 2001) are presented in detail. The OpenSees platform is chosen for its great capabilities in geotechnical earthquake engineering simulation and most importantly for the model to be openly available to the technical community. Finally, the performance of the model and its three dimensional implementation is evaluated by simulations of classical drained and undrained triaxial experiments on Toyoura sand by Verdugo and Ishihara (1996) and undrained cyclic torsional experiments on Toyoura sand. Simulations of the VELACS centrifuge shaking table tests are also carried out.

Symmetrization Method for the Generalized Plasticity Model with Nonassociated Plastic Flow Rule

J2-deformation-type Soil Model Coupled with State-Dependent Dilatancy and Fabric Evolution: Multiaxial Formulation and FEM Implementation

Unified Modeling of the Influence of Consolidation Conditions on Monotonic Soil Response Considering Fabric Evolution

A rotational plastic potential model and non-associated plastic flow rule

Formulation and implementation of an isotropic plasticity model enriched with shift stress and fractional flow rule

Discrete Element Method Models of Elastic and Elastoplastic Fiber Assemblies

Generalized Plastic Ordinary State-Based Peridynamic Model with Shear Deformation of Geomaterials

Bounding surface plasticity for sand using fractional flow rule and modified critical state line

A sequential linear complementarity problem for multisurface plasticity

A multiplicative finite strain crystal plasticity formulation based on additive elastic corrector rates: Theory and numerical implementation

A Generalized, Computationally Versatile Plasticity Model Framework - Part I: Theory and Verification Focusing on Tension‒compression Asymmetry

Elasto-Plastic Dynamic Finite Element Analysis of an Earth-Rockfill Dam

A Unified Plasticity Model for Large Post-Liquefaction Shear Deformation of Sand and Its Numerical Implementation

Application of Symmetric Successive over Relaxation Precondition Conjugate Method to Large-Scale Elasto-Plastic FEM Analysis for High Arch Dams

Explicit, Comprehensive Modeling of Multi-Axial Finite Strain Pseudo-Elastic Smas Up to Failure

Computational Plasticity Model for Hydrostatic Pressure Dependent Foam Materials

Implementation of the Zienkiewicz–Pande Model into a Four‐Dimensional Lattice Spring Model for Plasticity and Fracture

Evaluation of Associated and Non-Associated Flow Metal Plasticity; Application for Dc06 Deep Drawing Steel

An implicit stress update algorithm for the plastic nonlocal damage model of concrete

A 3D fractional elastoplastic constitutive model for concrete material

An Explicit Approach Toward Modeling Thermo-Coupled Deformation Behaviors of SMPs