Abstract:With the recent progresses on the designing and manufacturing of lightweight and high engineering current density superconducting cables, the need for an established, fast, and sufficiently accurate computational model for the forecasting of AC-losses in cold-dielectric conductors, is pivotal for increasing the investment confidence of power grid operators. However, validating such models is not an easy task, this because on the one hand, there is a low availability of experimental results for large scale power cables and, on the other hand, there is a large number of 2G-HTS tapes involved whose cross-sectional aspect ratio hinders the numerical convergence of the models within reasonable delivery times. Thus, aiming to overcome this challenge, we present a detailed two-dimensional H-model capable to reproduce the experimentally measured AC-losses of multi-layer power cables made of tens of 2G-HTS tapes. Two cable designs with very high critical currents have been considered, the first rated at 1.7 kA critical current, consisting of fifty 4 mm width 2G-HTS tapes, these split in 5 concentric layers wound over a cylindrical former, with the three inner layers forming an arrangement of 24 tapes shielded by two further layers with 13 tapes each. This cable is contrasted with a size wise equivalent cable with 67 superconducting tapes rated at 3.2 kA critical current, whose design implies the use of 40 tapes of 3 mm width split within four core layers, and 27 tapes of 4 mm width distributed in two shielding layers. In both situations a remarkable resemblance between the simulations and experiments has been found, rendering to acceptable estimates of the AC-losses for cold dielectric conductors, and offering a unique view of the local electrodynamics of the wound tapes where the mechanisms of shielding, magnetization, and transport currents can coexist within the hysteretic process.

A Study on Numerical Analysis of the AC Loss in a Single-layer Superconducting Cable Sample

Sheath Loss Calculation and Loss Reduction Analysis of 220 Kv Cable System

Investigation on Steady State Characteristics and Loss Reduction Measures of 220 Kv Power Cables

AC Loss Calculation of Tri-Axial HTS Cables

Numerical Study on AC Loss Characteristics of Conductor on Round Core Cables under Transport Current and Magnetic Field

Study on AC Loss of 10 kV Compact Three-Phase Coaxial HTS Cable

Analysis of AC Transport Loss in Conductor on Round Core Cables

Effect of Multilayer Configuration on Ac Losses of Superconducting Power Transmission Cables Consisting of Narrow Coated Conductors

Practical Forecasting of AC Losses in Multi-layer 2G-HTS Cold Dielectric Conductors

Design of AC loss testing system of HTS cable based on LabVIEW

AC Losses of the 5m BSCCO Cables with Shield

AC Loss Characteristics of a Single-layered Cylindrical High Temperature Superconductor

Electromagnetic Assessment and AC Losses of Triaxial Cables with Multiple 2G-HTS Layers Per Phase

Study on the Current Distribution and Structural Optimization of a High-Temperature Superconducting AC Power Cable

Ac Loss of A Multi-Layer Per Phase Tri-Axial Hts Cable with Balanced Current Distribution

A Novel AC Loss Measurement Technology for High Temperature Superconducting Cable With Large Current Capacity Using a Compensation Coil

Influence of Various Voltage Leads on AC Loss Measurement in a Double Layer BSCCO Conductor

Analysis on the Effect of Superconductor Layer Thickness on the AC Loss of Conductor on Round Core (CORC) Cables

Experimental Evaluation of Ac Losses in the Cold Dielectric High-Temperature Superconducting Cable

Numerical Study on the Influence of Superconductor Layer Thickness on AC Losses in Conductor on Round Core Cable

Mathematical Modeling and Current Characteristics Investigation of a 35 Kv Three-in-One High Temperature Superconducting (HTS) Power Cable