Abstract:In this paper, we develop high aspect ratio nanofibrils from a polycaprolactone-based thermoplastic polyurethane (TPU) and evaluate their performance as a toughening agent. Poly(methyl methacrylate) (PMMA) was chosen as the matrix material because of its inherent brittleness and low resistance to sudden shocks and impact. We show that the addition of as little as 3 wt % of TPU nanofibrils with an average diameter of ∼98 nm and very high aspect ratio can significantly improve both the tensile toughness (∼212%) and impact strength (∼40%) of the chosen matrix (i.e., PMMA) without compromising its original strength, stiffness, and transparency. We compare the performance of TPU nanofibrils with TPU spherical particles─the form TPU typically manifests into when melt-mixed with an immiscible polymer. Our findings highlight that the structure of TPU plays a crucial role in determining the critical concentration of TPU needed for the brittle-ductile transition of the matrix. We also provide new and valuable insights into the unique interfacial interaction (i.e., formation of fibrillar bridges) observed between the PMMA matrix and TPU. We also show that the inclusion of 3 wt % of TPU nanofibrils can notably enhance resistance to creep deformation, even at temperatures close to the glass transition temperature of the matrix. Finally, we evaluate recyclability and demonstrate that the composite containing 3 wt % of TPU nanofibrils can be mechanically recycled without losing any properties. The proposed TPU nanofibrils can withstand repeated reprocessing at temperatures up to 190 °C due to their very high melting point and thermal stability. This presents the opportunity for them to be utilized not just with amorphous PMMA, but also with a range of other materials that can be processed at or below this temperature to remarkably improve their toughness without sacrificing strength and stiffness.

Self-assembled Nanofibrillar Gel Network Toughened PMMA Nanocomposite by in Situ Thermal Polymerization of MMA Gel

L-Lysine-Based Dendritic Gelator Modified PMMA Nanocomposite

High toughness and light transmittance of PMMA composite prepared via in-situ polymerization with incorporating self-assembled dendritic gel networks

High Transparency and Toughness PMMA Nanocomposites Toughened by Self-Assembled 3D Loofah-Like Gel Networks: Fabrication, Mechanism, and Insight into the in Situ Polymerization Process

Polyurethane Acrylate Microgel Synthesized by Emulsion Polymerization Using Unsaturated Self-Emulsified Polymer

Preparation of Poly (methyl Methacrylate)/nanometer Calcium Carbonate Composite by In-Situ Emulsion Polymerization

Effect of MSU-J and Organic Modification on Mechanical and Thermal Properties of PMMA Hybrid Material

Gelator in-situ modify PMMA

Gelator <i>In Situ</i> Modify PMMA

ANCHORING OF AZO INITIATOR AND GRAFTING OF POLY(METHYL METHACRYLATE) ONTO NANAOMETER SILICA

Structure Optimization and Mechanical Model for Microgel-Reinforced Hydrogels with High Strength and Toughness

Highly Tough Yet Stiff, Transparent, and Recyclable PMMA Nanocomposites Incorporating TPU Nanofibril Networks with High Thermal Stability and Strong Interfacial Adhesion

Three-Dimensional Nanoporous Cellulose Gels As a Flexible Reinforcement Matrix for Polymer Nanocomposites.

Cellulose nanofibril aerogels reinforcing polymethyl methacrylate with high optical transparency

Preparation and Properties of Transparent Pmma/Zro2 Nanocomposites Using 2-Hydroxyethyl Methacrylate As A Coupling Agent

The Synthesis Of Amide Dendritic Gelators And Its Self-Assembly Behavior In Mma

Synthesis and Properties of Poly(Methyl Methacrylate)/Montmorillonite (pmma/mmt) Nanocomposites

Preparation of PMMA/Silica Nanocomposites by MMA Polymerization in the Presence of Silica Crosslinking Agent

Study on the PMMA/GO nanocomposites with good thermal stability prepared by in situ Pickering emulsion polymerization

Surface Mechanical Properties of Transparent Poly(methyl Methacrylate)/zirconia Nanocomposites Prepared by in Situ Bulk Polymerization

Toughening PMMA with modified nano-SiO2 particles