Abstract:This paper applies an energy method based on the high-order smooth curvature model to address the challenges of kinetostatically modeling the complicated nonlinear post-buckling behavior of inclined compliant beams. The proposed energy method is grounded in the principle of minimum strain energy, implying that the total strain energy is minimized at the equilibrium configuration. In this work, the high-order smooth curvature model is adopted to accurately model the bending strain energy of large deformation beams. Subsequently, the Lagrange multiplier method is employed to ascertain the minimum of strain energy while concurrently determining the corresponding tip loads. Additionally, the deformation shape and maximum stress are determined via the smooth curvature model. The proposed method is introduced for the first time in modeling compliant bistable mechanisms, and it is proven that the method can be used for modeling compliant beams with inclined angles ranging from 0 to 90 degrees. Following the modeling, finite element analysis and experimental tests are conducted to verify the accuracy of the proposed energy method. A comprehensive comparative analysis between proposed method and existing methods is conducted. The comparison results prove that the model is more computationally efficient without compromising modeling accuracy The proposed modeling method can not only be used for modeling compliant bistable mechanisms but also has extendable applications in modeling initially-curved compliant beams, contact-aid design problems, and distributed load problems.The present work not only advances the practical application of the proposed energy method but also lays the foundation for future research in modeling compliant mechanisms.

A Numerical Method for Static Analysis of Pseudo-Rigid-Body Model of Compliant Mechanisms

Design Of Compliant Mechanisms Using A Pseudo-Rigid-Body Model Based Topology Optimization Method

A Semi-Analytical Modeling Method for the Static and Dynamic Analysis of Complex Compliant Mechanism

A Pseudo-Static Model for Dynamic Analysis on Frequency Domain of Distributed Compliant Mechanisms

A Modified Pseudo-Rigid-body Modeling Approach for Compliant Mechanisms with Fixed-Guided Beam Flexures

An effective pseudo-rigid-body method for beam-based compliant mechanisms

A General Discretization-Based Approach for the Kinetostatic Analysis of Closed-Loop Rigid/Flexible Hybrid Mechanisms.

A Novel Mechanical Model Based on the Dynamic Stiffness Matrix for Unified Dynamic and Static Modeling of Planar Compliant Mechanisms

A novel compliance modeling method for compliant parallel mechanisms and its application

Analytical Compliance Modeling of Serial Flexure-Based Compliant Mechanism under Arbitrary Applied Load

An Energy-Based Approach for Kinetostatic Modeling of General Compliant Mechanisms

An Integrated Modeling Method for Piezo-Actuated Compliant Mechanisms

Modeling compliant bistable mechanisms: An energy method based on the high-order smooth curvature model

Spring-Joint Method for Topology Optimization of Planar Passive Compliant Mechanisms

Modeling and Analysis of Beam Flexure Based Double Parallel Guiding Mechanisms: A Modified Pseudo-Rigid-Body Approach

Static and Dynamic Analysis of Flexure Hinge Mechanisms Using the Weak-Form Quadrature Element Method

Constraint-Force-Based Approach of Modelling Compliant Mechanisms: Principle and Application

Extended Dynamic Stiffness Model for Analyzing Flexure-Hinge Mechanisms With Lumped Compliance

Pseudo-Rigid-Body Model for Corrugated Cantilever Beam Used in Compliant Mechanisms

A Novel Model To Simulate Flexural Complements In Compliant Sensor Systems

Analysis and design of spatial compliant mechanisms using a 3-D dynamic stiffness model