Abstract:Carbon-fiber reinforced composites are made up of three different phases. Tensile or compressive deformation in the longitudinal (fiber) orientation is controlled by the fibers, leading to a linear stress strain response which ends abruptly when the fibers fail by tensile fracture or kinking in compression. Conversely, major non-linear deformations can develop under transverse compression or in-plane shear because deformation is controlled by the polymeric matrix and the interphase.In this paper, first the V-notched rail shear test was used to research the mechanical properties of composite under in-plane shear loading, and the fracture surfaces of failed specimens were examined using scanning electron microscopy (SEM). The broken samples showed a large residual shear displacement. For [0/90](8s) cross-ply laminate V-notched beam test, the failure mode is the interactions of intralaminar and interlaminar failure. The intralaminar interfacial debonding, matrix cracking and interlaminar degradation occurs in succession. Then a representative volume element (RVE) of fiber random distribution was established, with two dominant damage mechanisms-matrix plastic deformation and interfacial debonding included in the simulation by the extended Drucker-Prager model and cohesive zone model respectively. The simulation results clearly reveal the damage process of the composites and the interactions of different damage mechanisms. It can be concluded that the in-plane shear fracture initiates as interfacial debonding and evolves as a result of interactions between interfacial debonding and matrix plastic deformation. The progressive damage process and final failure mode of in-plane shear model which are based on constitute are very consistent with the observed result under SEM of V-notched rail shear test. Also a transverse shear model was established as contrast in order to comprehensively understand the mechanical properties of composite materials under shear loading, and the progressive damage process and final failure mode of composite under transverse shear loading were researched.

Microstructure Deformation And Fracture Mechanism Of Highly Filled Polymer Composites Under Large Tensile Deformation

Sliding Behaviour of Carbon Nanothread Within a Bundle Embedded in Polymer Matrix

Tensile Performance of Polymer Nanocomposites with Randomly Dispersed Carbon Nanothreads

Effective Enhancement of a Carbon Nanothread on the Mechanical Properties of the Polyethylene Nanocomposite

Influence of Interfacial Adhesion on Stress-Strain Properties of Highly Filled Polyethylene

Mechanical behavior simulation of particulate-filled composite at meso-scale by numerical manifold method

Deformation and Fracture Mechanisms of Automated Fiber Placement Pre-Preg Laminates under Out-of-plane Tensile Loading

Fracture behavior and deformation mechanism of polypropylene/ethylene-octene copolymer/magnesium hydroxide ternary phase composites

Interaction of Multiple Micro-Defects on the Strength and Failure Mechanism of UD Composites by Computational Micromechanics

Dynamic Rheological Behavior for Polymer Composites Filled with Particles

Analysis of Fracture Damage Mechanical Properties of Particle Reinforced Polymer Composite Film Based on Micro-macro Finite Element Method

Damage behavior of high particle volume fraction composites with initial damage by finite element meso-modeling

Interfacial Debonding Behavior of A Rigid Particle-Filled Polymer Composite

RESEARCH PROGRESS OF EXPERIMENTAL STUDY ON THE MECHANICAL BEHAVIOR OF THE INTERFACE OF PARTICLE FILLED/BLENDED POLYMER COMPOSITES

Microscopic Progressive Damage Simulation of Unidirectional Composite Based on the Elastic–plastic Theory

Deformation and fracture of SiCp/Al composites under complex loading conditions: A simulation study

Interface Effect on the Mechanical Behaviour of Rigid Particle Filled Polymer

Influence of reactive compatibilization on the mechanical, thermal and rheological properties of highly filled PBT/Al2O3 composites

Effects of Particle Size, Particle/matrix Interface Adhesion and Particle Loading on Mechanical Properties of Particulate–polymer Composites

Microscopic Progressive Damage And Failure Analysis Of Carbon-Fiber Reinforced Composite Under Shear Loading

The origin of mechanical enhancement in polymer nanoparticle composites with ultra-high nanoparticle loading