Abstract:In this study, we examined the thermal effects throughout the process of the placement of span-scale girder segments on a 6×110-m continuous steel box girder in the Hong Kong-Zhuhai-Macao Bridge. Firstly, when a span-scale girder segment is temporarily stored in the open air, temperature gradients will significantly increase the maximum reaction force on temporary supports and cause local buckling at the bottom of the girder segment. Secondly, due to the temperature difference of the girder segments before and after girth-welding, some residual thermal deflections will appear on the girder segments because the boundary conditions of the structure are changed by the girth-welding. Thirdly, the thermal expansion and thermal bending of girder segments will cause movement and rotation of bearings, which must be considered in setting bearings. We propose control measures for these problems based on finite element method simulation with field-measured temperatures. The local buckling during open-air storage can be avoided by reasonably determining the appropriate positions of temporary supports using analysis of overall and local stresses. The residual thermal deflections can be overcome by performing girth-welding during a period when the vertical temperature difference of the girder is within 1 °C, such as after 22:00. Some formulas are proposed to determine the pre-set distances for bearings, in which the movement and rotation of the bearings due to dead loads and thermal loads are considered. Finally, the feasibility of these control measures in the placement of span-scale girder segments on a real continuous girder was verified: no local buckling was observed during open-air storage; the residual thermal deflections after girth-welding were controlled within 5 mm and the residual pre-set distances of bearings when the whole continuous girder reached its design state were controlled within 20 mm.

The Interactive Effects on Deformation Behavior in Laser Thermal Adjustment of Two-Bridge Actuators

Control Measures for Thermal Effects During Placement of Span-Scale Girder Segments on Continuous Steel Box Girder Bridges

Analysis and Experimentation of Novel Bi-Directional Photo-Thermal Micro-Actuators

Thermo-mechanical Coupling Analysis of a High-Speed Actuating Mechanism Based on a New Thermal Contact Resistance Model

Theoretical Modelling and Experimental Study of Novel Photothermal Microactuators

ANALYSIS OF NON-LINEAR PIEZOTHERMOELASTIC LAMINATED BEAMS WITH ELECTRIC AND TEMPERATURE EFFECTS

Opto-Piezothermoelastic Constitutive Modeling of a New 2-D Photostrictive Composite Plate Actuator

Analysis and experimentation of novel asymmetric photo-thermal micro-actuator

Thermo-electro-mechanical Synergistic Effect on the Actuation Performance of Piezoelectric Stack

The Effect of Infrared Laser-Induced Micro/Nano Photothermal Expansion and the Novel Method of Photothermal Actuation

Shape and Displacement Control of Beams With Various Boundary Conditions Via Photostrictive Optical Actuators

A New Multi-DOF Photostrictive Actuator for Dynamic Control of Shells: Modeling and Analysis

Photonic Control Of Plates Laminated With Multi-Dof Photostrictive Actuators

Thermo-Mechanical Coupling Analysis of the Actuating Mechanism in a High Speed Press

Actuator Placement Optimization For Piezothermoelectric Biotic Thermal Robust Structure

Nonlinear Piezothermoelasticity and Multi-Field Actuations, Part 2: Control of Nonlinear Deflection, Buckling and Dynamics

Piezoelectric Actuation of Von Karman Circular Plates with Thermal Deformation and Nonlinear Oscillation

Distributed Shell Control with A New Multi-Dof Photostrictive Actuator Design

Thermo-mechanical Modeling of Laser-Driven Non-Contact Transfer Printing: Two-Dimensional Analysis

Theoretical Modeling of Microscopic Photothermal Expansion and Experimental Study of Photothermal Microactuators

Modeling and Improvement for the Thermal Stability of Ring-Shaped Workpieces with Shape Boundary Constraints