Abstract:Abstract. Background To keep up with the logic area scaling, back-end-of-line (BEOL) structures are reduced to smaller pitches, requiring faster and reliable metrology and defect detection solution. Aim Metrology and detailed defect inspection at the early phases of process optimization. Approach Single exposure (SE) 0.33NA extreme ultraviolet (EUV) lithography was used along with a bright field mask for patterning in a metal damascene process flow of BEOL structures. We also used a dual damascene process flow for voltage contrast (VC) metrology study. Results Scatterometry technique, together with machine learning (ML), allowed us to have fast and accurate measurements of line-space (LS) and tip-to-tip (T2T) critical dimension (CD), and prediction of electrical performance. We demonstrated characterization results of stochastic defects across various test structures of 28-nm pitch devices. We used a large-area electron beam (e-beam) tool for high-speed large-area inspection which provided us with the quick feedback on defect signatures and scope for further root cause analysis. On a separate dual damascene integration flow, we used VC metrology to capture different failure modes in the patterning process of metal trenches with tight T2T and corresponding overlapping vias. Conclusions We studied the impact of stochastic resist defects on electrical measurements of meander (MR) and fork-fork (FF) structures, and showed that large electrical test structures, built with a relatively simple patterning flow, can be used at the early stages of resist and patterning development, as the electrical failures are almost exclusively caused by the resist defects. In the dual damascene flow, we demonstrated that VC metrology is useful to determine the design rule parameters and capture different failure mechanisms.

Novel Rapid Nondestructive Technique for Locating Tiny Voids in Metallization Line

Nondestructively creating nanojunctions by combined-dynamic-mode dip-pen nanolithography.

The Inline Detection of Tiny Bubble Defect and Solution for 14NM Photolithography Process

The Study And Investigation Of Inline E-Beam Inspection For 28nm Process Development

Non-ferromagnetic thin metal micron-sized defect detection system based on coherent accumulation-difference method

Investigating metal oxide resists for patterning 28-nm pitch structures using single exposure extreme ultraviolet: defectivity, electrical test, and voltage contrast study

The Study and Investigation of Inline E-Beam Inspection for 28nm Process Window Monitor

High-resolution Magnetic Imaging Probe with Staggered Sensor Arrays for Small Defects Inspection

A Method for Measuring Resistance of Metal Interconnection Inside Chip

Nano-mapping of vertical contact electrodes using synchrotron scanning photoelectron microscopy

Long working distance portable smartphone microscopy for metallic mesh defect detection

Research Status and Progress On Non-Destructive Testing Methods for Defect Inspection of Microelectronic Packaging

Methodology and Application of the Detection of Invisible Defect by Voltage Contrast Inspection

Defectivity Characterization of post-CMP Voiding in 32nm Cu Metallization

In Situ Analysis of Oxygen Vacancies and Band Alignment in HfO 2 /tin Structure for CMOS Applications

Fabrication of Sub-10 Nm Gap by Using Electron Beam Lithography

Detection, Verification and Analysis of Micro Surface Defects in Steel Filament Using Eddy Current Principles, Scanning Electron Microscopy and Energy-Dispersive Spectroscopy

Root Cause Analysis and Correction of Single Metal Contact Open-Induced Scan Chain Failure in 90nm node VLSI

Electropolishing—A Practical Method for Accessing Voids in Metal Films for Analyses

In Situ Analysis of Oxygen Vacancies and Band Alignment in HfO2/TiN Structure for CMOS Applications

Non-destructive Depth-Resolved Characterization of Residual Strain Fields in High Electron Mobility Transistors using Differential Aperture X-ray Microscopy