Abstract:When a variable magnetic field is applied to a ferromagnetic material, the change in magnetic induction occurs discontinuously as a result of the movement of magnetic domain walls. These discrete and stochastic jumps can induce, in a probe coil near the material surface, signals known as Magnetic Barkhausen Noise (MBN). MBN are sensitive to microstructural change, plastic deformation, and stress of the material. As a consequence, it can be used as a Non-Destructive Test in a large number of applications, for example to find unwanted phases, grain size control, quality control of surface treatments and degradation, detect residual stresses, etc. In this work, the on-line characterization of the transformation process of the austenite-martensite phases by deformation of stainless steel (SS) AISI 304 was studied applying the MBN technique. For this purpose, the specimens were subjected to uniaxial monotonic tensile tests up to failure. As a consequence of the plastic deformation of the SS austenitic phase, a ferromagnetic phase appears which produces MBN. The specimens were cut in two different directions considering the rolling direction (0 o and 90 o ).In order to characterize the MBN evolution with the strain, it was measured during the load increasing process applied to the specimen in uniaxial tensile tests. To characterize the transformation process, various statistical parameters were estimated which were evaluated based on the applied deformation. Finally, the temporal evolution and the Root Mean Square (RMS) function of the MBN signals were evaluated during the load increase. The MBN allowed to detect that the rolling direction of the specimens strongly influences the amount of martensite phase produced. Furthermore, it was also revealed that the MBN technique is appropriate for evaluating the initiation and evolution of the austenite-martensite phase transformation.

Comparisons of Damage-Induced Magnetizations Between Austenitic Stainless and Carbon Steel

Experimental Analysis of the Piezomagnetic Properties of Ferromagnetic Steels Subjected to Cyclic Tensile Stress

Experimental Analysis of the Piezomagnetic Behavior of Double-Shear Bolted Connections of Wire and Arc Additively Manufactured Steel

Deformation Induced Martensite Transformation and its Magnetic Memory Effect of Austenitic 304 Stainless Steel

Magnetomechanical Measurements for Nondestructive Evaluation of Failure in Steel Structural Element

Theoretical and Experimental Investigation on the Magnetomechanical Effect of Steel Bars Subjected to Cyclic Load

Measurement and Modeling of Deformation-Induced Martensitic Transformation in a Metastable Austenitic Stainless Steel under Cyclic Loadings

Mechanical Behavior and Fatigue Performance of Austenitic Stainless Steel under Consideration of Martensitic Phase Transformation

Experimental research on fatigue properties of corroded steel bars based on dynamic piezomagnetism

Study on deformation-induced martensitic transformation behavior of 304 and 316 stainless steels

Mechanical and Magnetic Hysteresis As Indicators of the Origin and Inception of Fatigue Damage in Steel

Fatigue, Magnetic and Mechanical Hysteresis

Variations in the Structure and Magnetic Parameters of Martensitic Steel Induced by Plastic Deformation

Effect of Deformation‐induced Martensite on the Pit Propagation Behavior of 304 Stainless Steel

Study of martensite induced by deformation with Magnetic Barkhausen Noise Technique

Method of Magnetic Control of Percentage of Ferrite and Strain-Induced Martensite in Stainless Steels

The differences of damage initiation and accumulation of DP steels: a numerical and experimental analysis

INFLUENCE OF MARTENSITE TRANSFORMATION ON PITTING PROPAGATION OF TYPE 304 STAINLESS STEEL

In-Situ Magnetic Barkhausen Noise Measurements to Identify Elastic-Plastic Deformation and Failure in Different Steels

Deformation induced martensite in an AISI 301LN stainless steel: characterization and influence on pitting corrosion resistance

Assessment of the Low-Cycle Strain-Induced Martensite Transformation in AISI 316 Stainless Steel by Magnetic and Acoustic Nondestructive Methods