Abstract:When a variable magnetic field is applied to a ferromagnetic material, the change in magnetic induction occurs discontinuously as a result of the movement of magnetic domain walls. These discrete and stochastic jumps can induce, in a probe coil near the material surface, signals known as Magnetic Barkhausen Noise (MBN). MBN are sensitive to microstructural change, plastic deformation, and stress of the material. As a consequence, it can be used as a Non-Destructive Test in a large number of applications, for example to find unwanted phases, grain size control, quality control of surface treatments and degradation, detect residual stresses, etc. In this work, the on-line characterization of the transformation process of the austenite-martensite phases by deformation of stainless steel (SS) AISI 304 was studied applying the MBN technique. For this purpose, the specimens were subjected to uniaxial monotonic tensile tests up to failure. As a consequence of the plastic deformation of the SS austenitic phase, a ferromagnetic phase appears which produces MBN. The specimens were cut in two different directions considering the rolling direction (0 o and 90 o ).In order to characterize the MBN evolution with the strain, it was measured during the load increasing process applied to the specimen in uniaxial tensile tests. To characterize the transformation process, various statistical parameters were estimated which were evaluated based on the applied deformation. Finally, the temporal evolution and the Root Mean Square (RMS) function of the MBN signals were evaluated during the load increase. The MBN allowed to detect that the rolling direction of the specimens strongly influences the amount of martensite phase produced. Furthermore, it was also revealed that the MBN technique is appropriate for evaluating the initiation and evolution of the austenite-martensite phase transformation.

Method of Magnetic Control of Percentage of Ferrite and Strain-Induced Martensite in Stainless Steels

Study of martensite induced by deformation with Magnetic Barkhausen Noise Technique

Eddy Current Detection of the Martensitic Transformation in AISI304 Induced upon Cryogenic Cutting

Investigation of Stress Concentration and Microdefect Identification in Ferromagnetic Materials within a Geomagnetic Field

Optical Detection of Phase Transformations in Steels: An Innovative Method for Time-Efficient Material Characterization During Tailored Thermo-mechanical Processing of a Press Hardening Steel

Identification and quantification of martensite in ferritic-austenitic stainless steels and welds

Coupled microscopic and micromagnetic depth-specific analysis of plastic deformation and phase transformation of metastable austenitic steel AISI 304L by flow forming

A method of discrimination between stress-assisted and strain-induced martensitic transformation using atomic force microscopy

Deformation Induced Martensite Transformation and its Magnetic Memory Effect of Austenitic 304 Stainless Steel

Variations in the Structure and Magnetic Parameters of Martensitic Steel Induced by Plastic Deformation

Fatigue Detection and Estimation in Martensitic Stainless-Steel Using Magnetic Nondestructive Evaluation Technique

New Microstructural Features Occurring During Transformation from Austenite to Ferrite under the Kinetic Influence of Magnetic Field in A Medium Carbon Steel

Assessment of the Low-Cycle Strain-Induced Martensite Transformation in AISI 316 Stainless Steel by Magnetic and Acoustic Nondestructive Methods

Measurement and prediction of the transformation strain that controls ductility and toughness in advanced steels

In-situ laser ultrasonics measurements of ferrite formation during stepped cooling of a 0.1C-2Mn dual phase steel

Experimental study on damage-induced magnetizations of austenitic stainless and carbon steel

A Study of Magnetic Phase Transitions in Nickel Zinc Ferrites with Differing Structure

Measurement and Modeling of Deformation-Induced Martensitic Transformation in a Metastable Austenitic Stainless Steel under Cyclic Loadings

Magnetization Changes Induced by Stress Noncoaxial with the Magnetic Field in a Low-Carbon Steel

Monitoring Microstructure and Properties Changes in 35CrMo Steel Components Using Magnetic Hysteresis Loop and X-Ray Diffraction Techniques

Experimental Study of the Micromechanical Behavior of Ferrite in DP Steel Under Various Stress States