Abstract:Through recent numerical studies, the shock-to-shock interactions between flash-boiling jets are believed to be the reason for multi-jet spray collapse in gasoline direct injection (GDI) engines. But this sort of interaction was not well understood through the experimental investigation. In the present study, a two-hole GDI injector was used to examine this process via optical diagnostics and CFD simulations. With the increase in superheat level (Rp), the shock waves (primary cells) in individual jets became observable. Further increase in Rp could cause shock-to-shock interactions, and a secondary cell could be formulated between two primary cells. The different intensity of shock-to-shock interactions would result in different jet-to-jet interaction behaviors. In the moderate interaction region, the secondary jet appeared inside and downstream of the secondary cell, but the sprays did not collapse. In the highly interaction region, both the secondary jet and spray collapse could be observed, where the secondary jet would laterally develop perpendicular with the plane of the two jets. The detailed numerical results showed that the secondary cell was small in the moderate interaction region, but became much larger in the highly interaction region. The occurrence of secondary cell directed the fuel from primary cells into the secondary cell, contributing to the generation of secondary jet. After flowing out of the secondary cell, the incipient secondary jet could subsequently entrain the nearby low-velocity fuel. Further, the strong shock-to shock interactions would alter the shape of primary cells, reducing the transverse velocity component of jets and promoting collapse. Based on the experimental and numerical results, the existence of shock-to-shock interactions and its important role in jet-to-jet interactions and spray collapse were fully illustrated, and this understanding would be of help in nozzle optimization.

High-speed shadow imaging in internal flow pattern and macroscopic characteristics of a R134a flash-boiling spray discharged through a vertical twin-orifice atomizer

Experimental investigation on the macroscopic spray and microscopic droplet diameter, velocity and temperature of R404A flashing spray

Flow visualization of the transient effect of the internal two-phase flow on the external iso-pentane flashing spray under different injection pressure

Spray Trajectory and 3D Droplets Distribution of Liquid Jet in Crossflow with Digital Inline Holography

Microscopic Characterization of Isooctane Spray in the Near Field under Flash Boiling Condition

Characterizing Under-Expansion Behaviors Induced by Rapid Phase Change of Flash-Boiling Jets

Three-Dimensional Simulation Of Effervescent Atomization Spray

Conical Liquid Sheet Morphology and 3D Droplet Distribution of Aviation Kerosene Pressure-Swirl Spray with Digital Off-Axis Holography

Comparison of Spray Collapses at Elevated Ambient Pressure and Flash Boiling Conditions Using Multi-Hole Gasoline Direct Injector

General Understanding on Spray Collapse Process of an Asymmetrical Multi-Hole Direct Injection Gasoline Injector under Wide Flash-Boiling Conditions

Experimental study of the macroscopic characteristics of methanol low-pressure injection spray

The Influence of Flash Boiling Conditions on Spray Characteristics with Closely Coupled Split Injection Strategy

Effect of Flash Boiling on Microscopic and Macroscopic Spray Characteristics in Optical Gdi Engine

Visualization Study on Atomization Characteristics and Heat Transfer Performance of R1336mzz Flash Spray Cooling

Characterizing External Flashing Jet from Single-Hole GDI Injector

Experimental study and empirical modelling of direct-injection n- heptane sprays formed under flash-boiling conditions

Spray Morphology Transformation of Propane, N-Hexane and Iso-Octane under Flash-Boiling Conditions

Radial Expansion of Flash Boiling Jet and Its Relationship with Spray Collapse in Gasoline Direct Injection Engine

Investigations on High-Speed Flash Boiling Atomization of Fuel Based on Numerical Simulations

Investigation into Shock-to-shock Interactions Induced by Flash Boiling and the Impact on Spray Behaviors

Experimental investigation on liquid breakup regimes and spray characteristics in slinger atomizers with various injection orifices