Abstract:To solve the issue of hexavalent chromium (Cr(VI)) contamination in water bodies, blue coke powder (LC) was chemically changed using potassium hydroxide to create the modified material (GLC), which was then used to treat a Cr(VI)-containing wastewater solution. The differences between the modified and unmodified blue coke's adsorption characteristics for Cr(VI) were studied, and the impact of pH, starting solution concentration, and adsorption period on the GLC's adsorption performance was investigated. The adsorption behavior of the GLC was analyzed using isothermal adsorption models, kinetic models, and adsorption thermodynamic analysis. The mechanism of Cr(VI) adsorption by the GLC was investigated using characterization techniques such as Fourier Transform Infrared Spectroscopy (FTIR), Field Emission Scanning Electron Microscope (FE-SEM), X-Ray Diffraction (XRD), and X-Ray Photoelectron Spectroscopy (XPS). With the biggest difference in removal rate at pH = 2, which was 2.42 times that of LC, batch adsorption experiments revealed that, under the same adsorption conditions, the GLC always performed better than LC. With a specific surface area that was three times that of LC and an average pore diameter that was 0.67 times that of LC, GLC had a more porous structure than LC. The alteration significantly increased the number of hydroxyls on the surface of GLC by altering the structural makeup of LC. The ideal pH for removing Cr(VI) was 2, and the ideal GLC adsorbent dosage was 2.0 g/L. Pseudo-second-order kinetic (PSO) model and Redlich-Peterson (RP) model can effectively describe the adsorption behavior of GLC for Cr(VI). Physical and chemical adsorption work together to remove Cr(VI) by GLC in a spontaneous, exothermic, and entropy-increasing process, with oxidation-reduction processes playing a key role. GLC is a potent adsorbent that can be used to remove Cr(VI) from aqueous solutions.

Research of Citric Acid Modified Adsorption of Cr (VI) Properties of Activated Carbons

Pyrolysing Wood Into Carbons For Cr(Vi) Adsorption: Performances Compared To Mineral Adsorbents

ADSORPTION OF Cr (VI) FROM AQUEOUS SOLUTION BY SLUDGE-BASE ACTIVATED CARBONS OBTAINED FROM CHEMICAL AND PHYSICAL ACTIVATION

Activated carbon with excellent chromium(VI) adsorption performance prepared by acid–base surface modification

Study on adsorption performance of polyacrylonitrile-based activated carbon fiber for trace of hexavalent chromium

Research on adsorption of low concentration of Cr (VI) from low temperature source water by modified PAC

Effect of modification with hydrobromic acid on the performance of activated carbon in the removal of hexavalent chromium from aqueous solution

Removal of Cr(VI) from low-temperature micro-polluted surface water by tannic acid immobilized powdered activated carbon.

The effect of impregnation ratio and surface modification on the characteristics and performance of activated carbon derived from Ficus carica leaves for Cr(VI) removal

Preparation of Fe-loaded Activated Carbon and Its Adsorption Property of U(VI) in Aqueous Solution

Micro-electrolysis of Cr (VI) in the nanoscale zero-valent iron loaded activated carbon.

Walnut shell-based activated carbon with excellent copper (II) adsorption and lower chromium (VI) removal prepared by acid-base modification

Research on the performance of modified blue coke in adsorbing hexavalent chromium

Cr(VI) adsorption performance and mechanism of an effective activated carbon prepared from bagasse with a one-step pyrolysis and ZnCl2 activation method

Oxalic Acid Modification Improves the Removal Effect of Cr(VI) by Biochar through Three Important Means: Adsorption, Reduction and Mineralization

Preparation of activated carbon with high nitrogen content from agro-industrial waste for efficient treatment of chromium (VI) in water

Composite adsorbent of Terminalia catappa fruit shell‐derived activated carbon and chitosan for enhanced removal of chromium(VI): kinetics, thermodynamics, equilibrium and adsorption mechanism

Adsorption of Cr(VI) from aqueous solutions using novel activated carbon spheres derived from glucose and sodium dodecylbenzene sulfonate

Preparation of ACF/CNT Composite and Cr(VI) Adsorption Properties

Study of the adsorption of Cr(VI) by tannic acid immobilised powdered activated carbon from micro-polluted water in the presence of dissolved humic acid.

Intensification of Cr(VI) adsorption using activated carbon adsorbent modified with ammonium persulfate