Abstract:Over the past several decades, trace heavy metal ion pollution, such as Cd(II), Cu(II), Pd(IV), etc., have attracted much attention because of their virulent and hard degradation properties. Recently, great efforts have been devoted to establish new methods and technologies to removal toxic metals. Among them, activated carbon adsorption, especially the modified activated carbon technology has been extensively studied due to its feasibility, such as, the low-cost of activated carbon, the recovery of the activated carbon. In this study, Cd(II) was chosen as the target heavy metal ion to evaluate the activity of modified powdered activated carbon(PAC) and commercial available tannic acid(TA), a kind of Chinese gallotannin with molecular weight 1701, was employed in the modification of the surface properties of PAC. Optimum experimental parameters such as pH, contact time, initial concentration of TA and adsorption capacity for tannic acid immobilisation onto PAC and Cd(II) adsorption on tannic acid-powdered activated carbon combination were determined , respectively. Adsorption of Cd(II) on PAC alone was also determined to compare the experimental results. The adsorption capacity for tannic acid immobilisation onto PAC was analysed by the solution absorbance variation of maximal ultraviolet absorption peak at 276 nm, and the concentration of Cd(II) in the solution was measured through AAS and ICP-AES. Specific surface area, pHpzc and surface functional groups of PAC and TA-PAC combination were determined by BET, powder addition method and Boehm titration method, respectively, to study on the adsorption mechanism of Cd(II) on modified surface. Results showed that TA was effective to enhance the metal adsorption capacity of PAC surfaces and the modified PAC got the maximal Cd(II) adsorption capacity with 25 gram tannic acid immobilised per gram PAC at the optimum immobilization pH value 3.5, at room temperature 18°C . The polyphenol structure of TA immobilised o- - n PAC surfaces may contribute to the changes of adsorption capacity. Neither of the Langmuir isotherm equation and Freundlich isotherm equation was found to provide reasonable well fit for the TA-PAC and Cd(II)-TA-PAC combinations.

Research on adsorption of low concentration of Cr (VI) from low temperature source water by modified PAC

Removal of Cr(VI) from low-temperature micro-polluted surface water by tannic acid immobilized powdered activated carbon.

Adsorption Characteristics of Metal-Capture-agent Immobilized PAC for Low Concentration Cr(Ⅵ) in Water at Low Temperature

Study of the adsorption of Cr(VI) by tannic acid immobilised powdered activated carbon from micro-polluted water in the presence of dissolved humic acid.

Study on adsorption performance of polyacrylonitrile-based activated carbon fiber for trace of hexavalent chromium

Adsorption and reduction of Cr(VI) from aqueous solution using cost-effective caffeic acid functionalized corn starch

New Insights into the Cooperative Adsorption Behavior of Cr(VI) and Humic Acid in Water by Powdered Activated Carbon.

Research of Citric Acid Modified Adsorption of Cr (VI) Properties of Activated Carbons

Adsorptive Removal of Cr(VI) from Aqueous Solutions with an Effective Adsorbent: Cross-Linked Chitosan/montmorillonite Nanocomposites in the Presence of Hydroxy-Aluminum Oligomeric Cations.

Activated carbon with excellent chromium(VI) adsorption performance prepared by acid–base surface modification

Amidoxime-Modified Polyacrylonitrile Nanofibers and Application to Cr (vi) Ions Adsorption

Facile synthesis of poly(tannic acid-1,4-butanediamine) microsphere based on the "self-assembly to polymerization" mechanism and its fast removal feature toward Cr(VI) ions

Study on Adsorption Properties of ACFs for Cr( Ⅵ ) from Aqueous Solution

Selective removal of Cr(VI) by tannic acid and polyethyleneimine modified zero-valent iron particles with air stability

Highly efficient adsorption of Cr(VI) from aqueous solutions by amino-functionalized titanate nanotubes

Thiourea crosslinked-amino modified graphene nanoflakes as an effective adsorbent to confine Cr(VI) via multiple combination mechanisms

Fabrication of PAN Electrospun Nanofibers Modified by Tannin for Effective Removal of Trace Cr(III) in Organic Complex from Wastewater

The Enhancement of Cd(II) Adsorption by Immobilsation of Tannic Acid onto Powdered Activated Carbon

Enhanced Adsorptivity of Hexavalent Chromium in Aqueous Solutions Using CTS@nZVI Modified Wheat Straw-Derived Porous Carbon

Impregnated Activated Carbons with Binary Oxides of Iron-Manganese for Efficient Cr(VI) Removal from Water

Adsorption-reduction of Cr(VI) onto unmodified and phytic acid-modified carob waste: Kinetic and isotherm modeling