Abstract:The earthquake forces used in design codes of buildings should be theoretical determinable. This work examines the seismic force modification factorR based on elastic-plastic time-history earthquake analysis of SDOF systems, wherein the hysteresis models are elastic-perfectly-plastic (EPP), elastic-linearly-hardening (ELH), shear-slipped and bilinear-elastic. The latter two models are analysed for separating the effect of the ductility and the energy-dissipating capacity. Three-hundred eighty-eight earthquake records from different site conditions are used in analysis. The ductility is taken to be 2, 3, 4, 5 and 6, with the damping ratio being 0.02, 0.035 and 0.05 respectively. The post-yield stiffness ratios 0.0, 0.1 and 0.2 are used in the analysis. TheR spectra are standardized by the characteristic period of the earthquake records, which leads to a much smaller scatter in averaged numerical results. It was found that the most important factor determiningR is the ductility.R increases more than linearly with ductility. The energy-dissipating capacity, damping and the post-yield stiffness are the less important factors. The energy dissipating capacity is important only for structures with short period and moderate period (0.3≤T/T g <5.0). For EPP and ELH models,R for 0.05 damping is 10% to 15% smaller than for 0.02 damping. For EPP and ELH models, greater post-yield stiffness leads to greaterR, but the influence of post-yield stiffness is obvious only when the post-yield stiffness is less than 10% of the initial stiffness. By means of statistical regression analysis the relation of the seismic force modification factorR with the natural period of the system and ductility for EPP and ELH models were established for each site and soil condition.

Development of Seismic Collapse Capacity Spectra and Parametric Study

Study on Seismic Collapse Capacity of Single-Degree-of-freedom Structural System

Dynamic P-△ Effects on Seismic Force Modification Factors

Spectra of Seismic Force Reduction Factors of MDOF Systems Normalized by Two Characteristic Periods

Static and dynamic inelastic P -Δ effect for seismic design

Yield Point Spectra with constant ductility

An efficient framework for structural seismic collapse capacity assessment based on an equivalent SDOF system

SEISMIC-FORCE-MODIFICATION FACTOR FOR STRUCTURES WITH BILINEAR ELASTOPLASTIC MODEL

Inelastic Displacement Amplification Factor for Ductile Structures with Constant Strength Reduction Factor

Inelastic Yielding Strength Demand Coefficient Spectra

Seismic Force Modification Factor for Ductile Structures

SEISMIC FORCE MODIFICATION FACTORS FOR STRUCTURES WITH SHEAR-SLIP HYSTERETIC MODEL

Performance-Based Seismic Design and Evaluation of Fused Steel Diagrid Frame

Collapse Capacity of Inelastic Single-Degree-of-Freedom Systems Subjected to Mainshock-Aftershock Earthquake Sequences

Study of collapse resistant capacity spectrum

Damage Spectra of SDOF Structures Under Tsunami Actions Considering the Nonlinear Dynamic Analysis Method

Quantitative investigation on collapse margin of steel high-rise buildings subjected to extremely severe earthquakes

Development of integrated system for progressive collapse analysis of building structures considering dynamic effects

Probability-based analytical model for predicting the post-earthquake residual deformation of SDOF systems

Analysis On Energy Demand For Inelastic Sdof Systems Under Near-Fault Impulsive Ground Motions

Developments in seismic structural analysis and design