Abstract:Multiple support excitations (MSE) have been implemented to investigate their effects on the dynamic response of large-span cable-stayed bridges due to earthquake-related hazards. Different system identification methods including the mode shape curvature method and modal strain energy method have been applied as health monitoring techniques to control the performance of different structural systems and detection of any possible deficiencies. The ABAQUS software was employed for the dynamic analysis of the bridge and the obtained results were utilized to identify the dynamic characteristics of the bridge by applying "Matlab" Program. The verified method was used to detect some intentionally induced damages to the considered bridge. An existing coherency function is used to generate the required earthquake inputs to different supports of the bridge. Then, the strain response energy-based method is employed to detect some intentionally induced damages to a considered bridge under the effect of MSE. The results indicate that the strain energy-based method accurately detects the damages in all possible damage modes, and the effect of changes cannot be ignored. Furthermore, the difference in dynamic parameters of the bridge in two modes of single and multiple support excitations is trivial and the difference does not affect the results of the applied methods of health monitoring in this research. Generally, the mode shape curvature method would not be an exact method for detecting damages in the chosen model. Therefore, the energy index based on the acceleration responses method is not an exact method for detecting damages. Finally, the energy index based on the strain responses method is an exact method that detects damages in all possible damage modes, in comparison to other methods. According to obtained results, the maximum shear values at the two end supports of the bridge in the non-uniform excitation case have an average increase of about 25% and for the towers, an average of around 23% increase compared to the uniform excitation case. The maximum displacement of the tower in MSE mode is 33% more than in single support excitations (SSE) mode. When the bridge experiences MSE, the stress in cables has an average of 10% increase.

Global Parametric Identification of a Cable-Stayed Bridge Model under Vertical Excitations using SNLSE Approach

Vibration-Based Damage Detection Of Cable-Stayed Bridges

Dynamic displacement estimation and modal analysis of long-span bridges integrating multi-GNSS and acceleration measurements

Automated modal identification using principal component and cluster analysis: Application to a long‐span cable‐stayed bridge

Cross spectral energy method for damage assessment of the cable-stayed bridge under operational conditions

System Identification of a Cable-Stayed Bridge Using Vibration Responses Measured by a Wireless Sensor Network

Damage Identification of Long-Span Bridges Based on the Correlation of Probability Distribution of Monitored Quasi-Static Responses

Damage Identification of Long-Span Bridges Based on the Correlation of Monitored Global Dynamic Responses in High Dimensional Space

Modal Rarameter Identification of a Cable-stayed Bridge Model by Merely Using Response Data

Dynamic Property Evaluation of a Long-Span Cable-Stayed Bridge (Sutong Bridge) by a Bayesian Method

Mode identifiability of a cable-stayed bridge based on a Bayesian method

Structural Damage Detection of Cable-Stayed Bridges Using Changes in Cable Forces and Model Updating

Time history analysis-based nonlinear finite element model updating for a long-span cable-stayed bridge

Damage Identification in Long-Span Cable-Stayed Bridges Under Multiple Support Excitations

Stayed-Cable Bridge Damage Detection and Localization Based on Accelerometer Health Monitoring Measurements

Cable bridge modal parameter statistical analysis under the time varying environment coupled with damage

Unveiling Structural Secrets: Active Learning for Assessing Ultimate Load Capacity in Parallel Wire Cable Systems under Time-Varying Force Identification with Frequency-Squeezing Processing and Vibration Frequency Method

Discovering time-varying aeroelastic models of a long-span suspension bridge from field measurements by sparse identification of nonlinear dynamical systems

Turning Telecommunication Fiber-Optic Cables into Distributed Acoustic Sensors for Vibration-Based Bridge Health Monitoring

Seismic Damage-Level Prediction Model of Cable-Stayed Bridge Using Nonlinear Time History Analysis for Intelligent Structural Health Monitoring under Earthquake Events

Damage identification of a large-span concrete cable-stayed bridge based on genetic algorithm