Abstract:In recent years, structural health monitoring has been paid more and more attention in bridge engineering community. Previous researches showed that ambient temperature was one of principal factors affecting structural modal parameters in long-term. In this paper, an experimental study on correlation between dynamic properties of a cable-stayed bridge and its structural temperature was performed under temperature controlled laboratory environment. Using hammer impacting method, a dynamic testing was conducted based on a steel cable-stayed bridge model which had a span layout of 0.9+1.9+0.9m. During the experiment, the first six vertical bending modes under the environmental temperature of 0, 20 and 40°C were identified with the consideration of three kinds of boundary conditions at the deck’s ends as to two degrees of freedom, i.e. the longitudinal translation (UX) and the rotation about the transverse beam (RotZ). The above boundary conditions are UX & RotZ not constrained, UX constrained only and UX & RotZ constrained, attempting to simulate the different conditions of the bridge expansion joints. The efforts were paid to explain the physical mechanism of the results based on the updated FE model. This experimental study indicates a tendency that the frequency of the cable-stayed bridge model decreases with the increase of temperature. And furthermore, the relative difference of frequencies between 0 and 40 °C is affected by boundary conditions; in other words, when the deck is free to expand, the variation of model’s frequencies is smaller than that when the deck is restrained to expand, which is similar to the condition of the bridge’s expansion joints cannot work as normal. This experimental study can give some reference to the research of SHM and damage identification for cable-stayed bridges.

Cable bridge modal parameter statistical analysis under the time varying environment coupled with damage

Vibration-Based Damage Detection Of Cable-Stayed Bridges

Fast Operational Modal Analysis of a Single-Tower Cable-Stayed Bridge by a Bayesian Method

Modal Identification and Cable Tension Estimation of Long Span Cable-Stayed Bridge Based on Ambient Excitation

Probabilistic Damage Detection of Long-Span Bridges Using Measured Modal Frequencies and Temperature

Analysis on Modal Frequency Variation of a Cable-Stayed Bridge Based on Monitoring Data

Early Warning Method of Structural Damage Using Localized Frequency Cointegration under Changing Environments

Effect analysis of environmental factors on structural modal parameters of a cable-stayed bridge

Statistical Analysis of Modal Properties of a Cable-Stayed Bridge through Long-Term Wireless Structural Health Monitoring

Condition Assessment of A Cable-Stayed Bridge Using the Dynamic Analysis Based on A Statistic Categorization Strategy.

Simulation of the Effect of Temperature Variation on Damage Detection in A Long-Span Cable-Stayed Bridge

Automatic Modal Frequency Identification of Bridge Cables under Influence of Abnormal Monitoring Data

Investigation of Dynamic Properties of Long-Span Cable-Stayed Bridges Based on One-Year Monitoring Data under Normal Operating Condition

Damage Identification in Cable-Stayed Bridge Based on Modal Analysis and Neural Networks

Correlation Study on Modal Frequency and Temperature Effects of A Cable-Stayed Bridge Model

Structural Damage Warning of a Long-Span Cable-Stayed Bridge Using Novelty Detection Technique Based on Wavelet Packet Analysis

Automated modal identification using principal component and cluster analysis: Application to a long‐span cable‐stayed bridge

Environmental Effects on Modal Frequency of Long-Span Cable-Stayed Bridges

Damage Detection for Long-Span Cable-Stayed Bridge

Dynamic Property Evaluation of a Long-Span Cable-Stayed Bridge (Sutong Bridge) by a Bayesian Method