Abstract:Multiple support excitations (MSE) have been implemented to investigate their effects on the dynamic response of large-span cable-stayed bridges due to earthquake-related hazards. Different system identification methods including the mode shape curvature method and modal strain energy method have been applied as health monitoring techniques to control the performance of different structural systems and detection of any possible deficiencies. The ABAQUS software was employed for the dynamic analysis of the bridge and the obtained results were utilized to identify the dynamic characteristics of the bridge by applying "Matlab" Program. The verified method was used to detect some intentionally induced damages to the considered bridge. An existing coherency function is used to generate the required earthquake inputs to different supports of the bridge. Then, the strain response energy-based method is employed to detect some intentionally induced damages to a considered bridge under the effect of MSE. The results indicate that the strain energy-based method accurately detects the damages in all possible damage modes, and the effect of changes cannot be ignored. Furthermore, the difference in dynamic parameters of the bridge in two modes of single and multiple support excitations is trivial and the difference does not affect the results of the applied methods of health monitoring in this research. Generally, the mode shape curvature method would not be an exact method for detecting damages in the chosen model. Therefore, the energy index based on the acceleration responses method is not an exact method for detecting damages. Finally, the energy index based on the strain responses method is an exact method that detects damages in all possible damage modes, in comparison to other methods. According to obtained results, the maximum shear values at the two end supports of the bridge in the non-uniform excitation case have an average increase of about 25% and for the towers, an average of around 23% increase compared to the uniform excitation case. The maximum displacement of the tower in MSE mode is 33% more than in single support excitations (SSE) mode. When the bridge experiences MSE, the stress in cables has an average of 10% increase.

Damage Identification in Long-Span Cable-Stayed Bridges Under Multiple Support Excitations

Vibration-Based Damage Detection Of Cable-Stayed Bridges

Localization of Damaged Cable in a Tied‐arch Bridge Using Arias Intensity of Seismic Acceleration Response

Damage identification in cable-stayed bridges based on the redistribution of dead and thermal loads

Damage Identification of Long-Span Bridges Based on the Correlation of Probability Distribution of Monitored Quasi-Static Responses

Damage Identification of Multi-Box Steel-Concrete Composite Bridges Based on Modal Curvature Difference Method

Damage Identification of Long-Span Bridges Based on the Correlation of Monitored Global Dynamic Responses in High Dimensional Space

Stayed-Cable Bridge Damage Detection and Localization Based on Accelerometer Health Monitoring Measurements

Energy-Based Damage Assessment Methodology for Structural Health Monitoring of Modern Reinforced Concrete Bridge Columns

Assessment of bridge vulnerability due to seismic excitations considering wave passage effects

Drive-by-bridge inspection for damage identification in a cable-stayed bridge: Numerical investigations

Structural Damage Detection of Cable-Stayed Bridges Using Changes in Cable Forces and Model Updating

Health monitoring of steel box girder bridges using non-contact sensors

A multi-way data analysis approach for structural health monitoring of a cable-stayed bridge

Study on the dynamic behaviour of Bafgh-Bandar Abbas lane railway bridge for structural health monitoring purpose

Damage detection of a cable-stayed bridge based on combining effective intrinsic mode functions of empirical mode decomposition using the feature selection technique

Cross spectral energy method for damage assessment of the cable-stayed bridge under operational conditions

Investigation of Seismic Damage of Cable-Stayed Bridges with Different Connection Configuration

Mode identifiability of a cable-stayed bridge based on a Bayesian method

Assessing time-dependent damage to a cable-stayed bridge through multi-directional ground motions based on material strain measures

Structural Damage Detection Based on Structural Macro-Strain Mode Shapes Extracted From Non-Stationary Output Responses