Abstract:Printing of electrical circuits and interconnects using isotropic conductive adhesives (ICAs) is of great interest due to their low-temperature processing and compatibility with substrates for applications in sensors, healthcare, and flexible devices. As a lower cost alternative to silver (Ag), copper (Cu)-filled ICAs are desirable but limited by the formation of high-resistivity Cu surface oxides. To overcome this limitation, self-assembled monolayers (SAMs) of octadecanethiol (ODT) have been demonstrated to reduce the oxidation of micrometer-scale Cu powder particles for use in ICAs. However, the deposition and function of the SAM require further investigation, as described in this paper. As part of this work, the stages of the SAM deposition process, which included etching with hydrochloric acid to remove pre-existing oxides, were studied using X-ray photoelectron spectroscopy (XPS), which showed low levels of subsequent Cu oxidation when ODT coated. The treated Cu powders were combined with one- or two-part epoxy resins to make Cu-ICAs, and the effect of the Cu surface condition and weight loading on electrical conductivity was examined. When thermally cured in an inert argon atmosphere, ICAs filled with Cu protected by ODT achieved electrical conductivity up to 20 × 105 S·m-1, comparable to Ag-ICAs, and were used to make a functional circuit. To understand the function of the SAM in these Cu-ICAs, scanning and transmission electron microscopy were used to examine the internal micro- and nano-structures along with the elemental distribution at the interfaces within sections taken from cured samples. Sulfur (S), indicative of the ODT, was still detected at the internal polymer-metal interface after curing, and particle-to-particle contacts were also examined. XPS also identified S on the surface of cured Cu-ICAs even after thermal treatment. Based on the observations, electrical contact and conduction mechanisms for these Cu-filled ICAs are proposed and discussed.

Highly Conductive and Reliable Copper-Filled Isotropically Conductive Adhesives Using Organic Acids for Oxidation Prevention

Electrically conductive adhesives filled with surface modified copper particles

Effects of Nano Fillers on the Conductivity, Adhesion Strength and Reliability of Isotropic Conductive Adhesives (ICAs)

Copper conductive adhesives for printed circuit interconnects

Isotropically Conductive Adhesives Filled with Copper Nanoparticles and Micron-Sized Flakes

Study of Surface Treatment of Copper Fillers for Improvement of Electrically Conductive Adhesives

Electrical property enhancement of electrically conductive adhesives through Ag-coated-Cu surface treatment by terephthalaldehyde and iodine

The Role of Self-Assembled Monolayers in the Surface Modification and Interfacial Contact of Copper Fillers in Electrically Conductive Adhesives

The synergistic effect of micron spherical and flaky silver-coated copper for conductive adhesives to achieve high electrical conductivity with low percolation threshold

High conductivity of isotropic conductive adhesives filled with silver nanowires

Highly conductive, flexible, bio-compatible poly-urethane based isotropic conductive adhesives for flexible electronics

Using Novel Materials to Enhance the Efficiency of Conductive Polymer

Properties Investigation on Isotropical Conductive Adhesives Filled with Silver Coated Carbon Nanotubes

Preparation and Performance of Epoxy Resin Conductive Adhesive with Fast-Curing Feature at Low Temperature

Electrical properties of electrically conductive adhesives from epoxy and silver-coated copper powders after sintering and thermal aging

A study on the resistivity and mechanical properties of modified nano-Ag coated Cu particles in electrically conductive adhesives

Copper Particles/epoxy Resin Thermosetting Conductive Adhesive Using Polyamide Resin As Curing Agent

Study on the Anti-Oxidant Property of Copper Powder Coated Silane Coupling Agent in Isotropically Conductive Adhesives

Properties of Isotropical Conductive Adhesives Filled with Carbon Nanotubes

Flexible thermoplastic conductive adhesive with high reliability

Surface Iodination: A Simple and Efficient Protocol to Improve the Isotropically Thermal Conductivity of Silver-Epoxy Pastes